Manualsbrain.com
  1. Manuals
  2. Brands
  3. ONKYO
  4. TX-SR502
  5. Instruction Manual

ONKYO TX-SR502 Instruction Manual

Download
Page of 60
 
31
 
Turning On
 
Notes: (not for the American model)
 
• The TX-SR502/TX-SR502E is shipped with the 
POWER switch in the ON position (
). When the 
power cord is connected for the very first time, the 
TX-SR502/TX-SR502E will enter Standby and the 
STANDBY indicator will light up.
• To completely shutdown the TX-SR502/TX-SR502E, 
set the POWER switch to the OFF position (
).
 
First Time  Setup
 
To enjoy Dolby Digital and DTS, you must connect your 
DVD player to the TX-SR502/TX-SR502E by using a 
digital audio connection (coaxial or optical).
With this function you can assign digital audio inputs to 
input sources. You only need to change these assign-
ments if your connections don’t match the default 
assignments listed below. 
For example, if you connect your DVD player to the 
COAXIAL DIGITAL IN, you’ll need to change the 
DVD input source from OPT 1 to COAX, and change the 
CD input source to something other than COAX.
If you want to use the TAPE input source with only the 
analog TAPE IN sockets, you’ll need to change the 
TAPE assignment from “OPT3” to “----” (Analog).
You can change the assignments as follows.
 
Turning On the TX-SR502/TX-SR502E
 
1
 
Set the [POWER] switch to the 
ON position (
). (Skip this step if 
you have American model.)
 
The TX-SR502/TX-SR502E enters 
Standby mode, and the STANDBY 
indicator comes on.
 
Note:
 
• The remote controller has no effect 
while the [POWER] switch in the 
OFF position.
 
2
 
Press the [STANDBY/ON] button. 
Alternatively, press the remote 
controller’s [AMP] button fol-
lowed by the [ON] button.
 
The TX-SR502/TX-SR502E comes on, 
the display lights up, and the 
STANDBY indicator goes off.
To turn off the TX-SR502/
TX-SR502E, press the [STANDBY/
ON] button. The TX-SR502/
TX-SR502E will enter Standby mode. 
To prevent any loud surprises the next 
time you turn on your TX-SR502/
TX-SR502E, always turn down the vol-
ume before turning it off.
CD
+10
0
CLEAR
1
2
3
4
5
6
7
8
9
V1
V2
V3
DVD
MULTI CH
--/---
TAPE
TUNER
INPUT
I
+
-
AMP
+
_
TONE
TUNER/
TAPE
ON
STANDBY
T V
TV CH
T V VOL
REMOTE MODE
STANDBY/ON
PHONES
SPEAKERS B
A
STANDBY/ON
POWER
PHONES
OFF
ON
SPEAKERS B
A
STANDBY/ON
STANDBY/ON
POWER
STANDBY
ON
• American 
model
• Other 
models
POWER
OFF
ON
STANDBY/ON
STANDBY
ON
Remote
controller
 
Assigning the Digital Inputs to Input 
Sources
 
Input source
DIGITAL INPUT
 
DVD
OPT1 (OPTICAL 1)
VIDEO 1
- - - - (Analog)
VIDEO 2
OPT2 (OPTICAL 2)
VIDEO 3
- - - - (Analog)
TAPE
OPT3 (OPTICAL 3)
CD
COAX (COAXIAL)
 
1
 
Press the input selector button 
for the source that you want to 
assign.
 
(Digital inputs cannot be assigned to 
the TUNER input source.)
 
2
 
Press the [DIGITAL INPUT] 
button.
 
The current assignment appears.
 
3
 
Press the [DIGITAL INPUT] but-
ton repeatedly to select COAX, 
OPT1, OPT2, OPT3, or – – – –.
STANDBY/ON
PHONES
STANDBY
DISPLAY
TONE
TUNING MODE
DIGITAL INPUT
LISTENING
MODE
STEREO
MEMORY
RETURN
SETUP
VIDEO 
2
TAPE
TUNER
C D
VIDEO 
3
DVD
VIDEO 
1
VCR
MULTI CH
MASTER  VOLUME
TUNING
ENTER
PRESET
S VIDEO
VIDEO
AUDIO
L
R
VIDEO 
3 INPUT
CLEAR
SPEAKERS B
A
DIGITAL INPUT
Input selector buttons
VIDEO 
2
TAPE
C D
VIDEO 
3
DVD
VIDEO 
1
VCR
DIGITAL INPUT
DIGITAL INPUT
TX-SR502_En.book Page 31 Tuesday, February 17, 2004 12:14 PM