Tascam DR-07MKII User Guide

TASCAM DR-07MKII

NOTE

The pop-up message of “I/O Too Short” appears if the

•

section between the IN and OUT points is too short. Set
them again. The section should be 1 second or longer.
Press the

•

MARK button again to clear the IN and OUT

points.
To stop loop playback, press the MENU button when the

•

Playback Control screen is open. Press the MENU button
again to start loop playback between the set IN and OUT
points.
You cannot set the IN and OUT points in different files.

•

The previous IN and OUT point settings are lost when you

•

set the IN point on a different file.
Accurate assignment of IN and OUT points is not always

•

possible for variable bit rate (VBR) MP3 files.

Changing the playback speed (VSA)

The unit features the VSA (Variable Speed

Audition) function that changes the playback

speed without changing its pitch.

CAUTION

The VSA function cannot be effective for files recorded with a
sampling frequency of 96kHz, and

will be shown in

the Home Screen. However, the setting of playback speed can
be changed. To apply the adjustment of playback speed,
select a file recorded with a sampling frequency of 44.1 kHz
or 48 kHz by using the Â or¯ button.

Press the + or – button after opening the

Playback Control screen to increase or decrease

the playback speed.

The VSA function can change the playback speed

in the range from 0.5 (50%) to 1.5 (150%) times

(in 0.1 increments) the normal speed.
Press the PB CONT button to the Home Screen

while maintaining the set playback speed

effective. The

icon appears if the

playback speed is set to a value larger or smaller

than 1.0, respectively.

6–Playback