Elmo dvr v5.01 User Manual
6. In Hardware Setup, enter the Working Time value. This will configure the time that the PTZ camera will remain
at each preset. In the example below, the PTZ camera will remain at each preset for 5 seconds.
7. Click Alarm/Preset. The Alarm/Preset window will appear.
8. Configure the Preset for each camera related to the sensor number that will activate the specified preset. In example
below: Sensor 1 activates Preset 4 on Camera 1; Sensor 2 activates Preset 9 on Camera 5; Sensor 4 activates Preset
1 on Camera 7; Sensor 5 activates Preset 5 on Camera 2.
1 on Camera 7; Sensor 5 activates Preset 5 on Camera 2.
3.6. Motion Setup
3.6.1. Overview
Motion Setup allows for the configuration of up to 5 motion detection zones for each camera. Video display and recording
options are configured in the Setup menu.
options are configured in the Setup menu.
Note
Unless Motion Recording is activated in the
Schedule setup, the camera will not record
and motion will not be detected even if the
Motion detection target zones are con-
figured for this camera.
Schedule setup, the camera will not record
and motion will not be detected even if the
Motion detection target zones are con-
figured for this camera.
19
ELMO DVR User Manual v5.01
Motion Setup
ELMO DVR Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at