Elmo dvr v5.01 User Manual
In the Advanced Setup:
1. Configure the Record Frame FPS for each camera
2. Configure the Emergency Frame FPS for each camera. The Emergency Frame Rate is activated when motion
is detected on the specific camera. This function will reduce the recording speed on all other cameras to compensate.
The camera will return to its normal recording speed once the motion has stopped. In this example, the recording
speed is 10 fps for all 12 connected cameras. When the motion is detected, the camera, where the motion has occurred,
will start recording 30 fps.
The camera will return to its normal recording speed once the motion has stopped. In this example, the recording
speed is 10 fps for all 12 connected cameras. When the motion is detected, the camera, where the motion has occurred,
will start recording 30 fps.
3. Configure the Resolution for each camera
4. Configure the Recording Quality for each camera
5. Configure the Transfer Quality for each camera
6. Click Reset to reset all changes. Click Ok to save the changes.
3.7. Schedule Setup - Simple Mode
3.7.1. Overview
Schedule setup controls the type of recording for each camera: Continuous, Motion, Sensor or Pre-alarm. Each camera
can have its own settings, which can also be copied to other cameras.
can have its own settings, which can also be copied to other cameras.
C: Continuous recording – the video signal is being recorded continuously. A lot of hard drive space is required
for this type of recording. Continuous recording is required for audio recording. Continuous recording has to be used on
its own and cannot be combined with any other types of recording.
for this type of recording. Continuous recording is required for audio recording. Continuous recording has to be used on
its own and cannot be combined with any other types of recording.
M: Motion recording – the selected camera records only when motion is detected. Motion detection target zones
have to be configured in the Motion Setup. Motion recording can be used on its own or can be combined with Sensor
and/or Pre-alarm recordings.
have to be configured in the Motion Setup. Motion recording can be used on its own or can be combined with Sensor
and/or Pre-alarm recordings.
O/S: Object/Sensor recording – the selected camera records based on the alarms triggered in the VideoLogix
or when the sensor has been triggered. The VideoLogix has to be enabled for the selected camera and/or sensor has to
be enabled and be associated with the specific camera in Hardware Setup. Object/Sensor recording can be used on its
own or can be combined with Pre-alarm recordings. When combined with M:Motion, O/S:Object/Sensor becomes S:Sensor
recording.
or when the sensor has been triggered. The VideoLogix has to be enabled for the selected camera and/or sensor has to
be enabled and be associated with the specific camera in Hardware Setup. Object/Sensor recording can be used on its
own or can be combined with Pre-alarm recordings. When combined with M:Motion, O/S:Object/Sensor becomes S:Sensor
recording.
Motion and Sensor recording combined with Prealarm
O/S Object/Sensor recording combined with Prealarm
P: Prealarm recording – is combined with either Motion, Motion and Sensor, or Object/Sensor recording. ELMO DVR
stores 5 seconds of video recording in a buffer which is continuously overwritten. If Prealarm recording is used, a 5-second
video buffer is added to the beginning of the recorded video segment.
stores 5 seconds of video recording in a buffer which is continuously overwritten. If Prealarm recording is used, a 5-second
video buffer is added to the beginning of the recorded video segment.
24
ELMO DVR User Manual v5.01
Schedule Setup - Simple Mode
ELMO DVR Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at