Elmo dvr v5.01 User Manual
3.10. Communication Setup
3.10.1. Overview
Communication Setup contains the Phone numbers and IP addresses that will be used in case of emergency. The phone
numbers from Communication Setup are used by Intelli-Guard™. The IP Emergency Address is used to communicate with
the Emergency Monitor installed on the remote system.
numbers from Communication Setup are used by Intelli-Guard™. The IP Emergency Address is used to communicate with
the Emergency Monitor installed on the remote system.
3.10.2. Configuring Communication Setup
To set up Communication setup, do the following:
1. Specify whether the connection is allowed. PSTN (Public Switched Telephone Network - modem). ISDN (Integrated
Services Digital Network). If no connection available (no modem, no LAN, etc.), check No Connection - this
will also prevent unwanted guests from accessing the system remotely.
will also prevent unwanted guests from accessing the system remotely.
2. Configure the Live Video Stream Bandwidth. This menu controls the bandwidth of the data transferred
over the network. Select No limit to use all the available connection speed to transfer data. If No limit is se-
lected, the Server might be slowed down in cases where multiple users are dialing into the system at the same time.
lected, the Server might be slowed down in cases where multiple users are dialing into the system at the same time.
28
ELMO DVR User Manual v5.01
Communication Setup
ELMO DVR Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at