Omnitron iConverter T1/E1 8703-1-D User Manual
Product codes
8703-1-D
ManageMent
Management of the plug-in module is accomplished by using
a Management Module¹ (such as an iConverter NMM2 or
10/100M2) that provides monitoring, configuration and trap
notification. The management module can be accessed
via SNMP, Telnet and via a serial port. The SNMP-based
management is accomplished via Omnitron’s intuitive, graphic-
oriented NetOutlook management software or third party
SNMP management software, while the Telnet and the serial
interfaces have an easy-to-use, menu-driven interface.
Some of the real-time T1/E1 parameters that can be monitored
include power, link and data receive status. Other parameters
include module type and model, hardware and software
revisions, serial numbers and a user-defined identifier.
The user can override the T1/E1 module’s physical DIP-switch
settings by using SNMP or Telnet to remotely configure
DIP-switch-selectable parameters such as line settings and
loopback control.
In addition to all standard iConverter SNMP traps such
as module insertion and removal, the T1/E1 modules can
generate traps on port state changes including link-up and
link-down. Trap monitoring of specific events can be selectively
enabled or disabled by the network administrator.
¹ For complete management support, use a M2 series module (NMM2,
GX/TM2, 2GXM2, 10/100M2, 2FXM2) or higher.
Page 2
speciFications
iConverter
T1/E1
appLication DiagraM
Model Type
T1/E1
Protocols
ANSI: T1.403, T1.102
AT&T: T62411
ITU: G.703, G.704, G.706, G.736, G.755, G.823
ETSI: ETS 300 166
AT&T: T62411
ITU: G.703, G.704, G.706, G.736, G.755, G.823
ETSI: ETS 300 166
Connectors and
Cables
Coax:
Twisted Pair:
Twisted Pair:
Fiber:
Multimode:
Single-mode:
Multimode:
Single-mode:
BNC, 75 Ohm E1
RJ45/RJ48, 100 Ohm T1/120 Ohm E1
RJ45/RJ48, 100 Ohm T1/120 Ohm E1
(Active Pairs are Pins 1 , 2 and 4 , 5)
SC or ST
50/125, 62.5/125, 100/140mm
9/125mm
SC or ST
50/125, 62.5/125, 100/140mm
9/125mm
Fiber Connectors
SFP:
Dual Fiber:
Single-Fiber:
Dual Fiber:
Single-Fiber:
LC
SC, ST, LC, MT-RJ
SC
SC, ST, LC, MT-RJ
SC
Controls
UTP Crossover, Cable Type / Distance, Loop, Fiber AIS,
UTP AIS, Fiber Optic Test
LED Displays
Power, Test, RJ-45/RJ-48 Link, Fiber Optic Link
DC Power Connector
Plug-in:
Standalone
Standalone
0.7A @ 3.3VDC (typical)
5 - 32VDC
0.3A @ 9VDC
5 - 32VDC
0.3A @ 9VDC
AC Power Adapter
[US]
Plug-in:
Standalone:
Standalone:
N/A
120VAC/60Hz
0.05A @ 120VAC
120VAC/60Hz
0.05A @ 120VAC
AC Power Adapter
[Universal]
Plug-in:
Standalone:
Standalone:
N/A
100-240VAC/50 to 60Hz
0.05 A @ 120VAC
100-240VAC/50 to 60Hz
0.05 A @ 120VAC
Dimensions
Plug-in:
Standalone:
Standalone:
W:0.85” x D:4.5” x H:2.8”
W:3.8” x D:4.8” x H:1.0”
W:3.8” x D:4.8” x H:1.0”
Weight
Plug-in:
Standalone:
Standalone:
8 oz
1 lb
1 lb
Compliance
UL, CE, FCC Class A
Temperature
Standard:
Wide:
Extended:
Storage:
Wide:
Extended:
Storage:
0 to 50
o
C
-40 to 60
o
C
-40 to 75
o
C
-40 to 80
o
C
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4000m
MTBF (Hours)
Plug-in:
Standalone
Standalone
without power adapter
Standalone
Standalone
with US power adapter:
Standalone
Standalone
with Universal adapter:
580,000
590,000
250,000
100,000
The iConverter T1/E1 media converter provides a cost-effective
solution for extending telecom demarcation points. A pair of
T1/E1 converters is used to extend the demarcation between
buildings via fiber. Multimode or single-mode fiber can be
used, and fiber links can be extended up to 60km using single-
mode fiber.