Samsung cht-2010 Instruction Manual

Switch on the television.

To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).

Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:

The DVD-VCR is switched on automatically.

Select:

◆

The station to be recorded using the PROG (    or  ) buttons
or

◆

The LINE source using the INPUT SEL. button for a satellite
tuner or external video source

Result:

The channel number is displayed and the
programme can be seen on the television.

Select the recording speed by pressing the SPEED button as
many times as required (see page 30).

Hold the REC (

●

)  button down for a while to start recording.

Result:

The record indicator appears on the television
screen and DVD-VCR display. An index is recorded
on the tape (see page 38).

Press the REC (

●

)  button several times to increase the 

recording time in:

◆

30-minute intervals up to four hours

◆

1-hour intervals up to nine hours 

Result:

The length is displayed on the television displays.
The selected programme is recorded for the length
of time requested. At the end of that time, the DVD-
VCR stops recording automatically and power off.

If you wish to cancel the recording before the end, press
STANDBY/ON.

☛

If the end of the tape is reached while recording:

◆

The recording stops and power off.

☛

This function is not available in DVD recording

●

00462A CHT-2010/HACO-GB2  5/12/04 6:41 PM  Page 32