Samsung SRP - 350 User Guide

 

1-5 Setting the Memory Switches 
 
This printer has “Memory Switch” set which is software switches. Memory Switch set has 
“MSW1”, “MSW2”, “MSW8”, “MSW9” “Customize value”, “Serial communication condition”. 
“Memory Switch setting utility” can change the Memory Switch set to ON or OFF as shown 
in the table below. (default : all OFF) 
 
 
※

The Memory Switch is available to be changed by three methods. 
    - Memory Switch setting utility. 
    - Control from BXL/POS command. 
 
 
Settings of the Memory Switch are stored in the NV memory : therefore, even if the printer 
is turned off, the settings are maintained. 
 
 
 
MSW1 

Switch 

Function 

ON 

OFF 

1~8 

Reserved 

-- 

Fixed to OFF 

 
MSW2 

Switch 

Function 

ON 

OFF 

1 

Font Selection 

Font B (9 x 24) 

Font A (12 x 24) 

2 

Auto Cutter Function 

Full Cutting 

Partial Cutting 

3~8 

Code Page Selection 

Refer to following Table