Samsung dvd-hr735 Instruction Manual

Page of 129
English - 25
P
layback
■ 
Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal.
However, when playing a DVD, the data
transmitted to a TV is digital. Therefore either 
a digital-to-analog converter (in the HDD & DVD
RECORDER) or an analog-to-digital converter 
(in the TV) is required. During this conversion, 
the picture quality is degraded due to noise and
signal loss. HDMI technology is superior because
it requires no D/A conversion and is a pure digital
signal from the HDD & DVD RECORDER to your
TV.
■ 
What is the HDCP?
HDCP (High-bandwidth Digital Content
Protection) is a system for protecting DVD content
outputted via HDMI from being copied.
It provides a secure digital link between a video
source (PC, DVD. etc) and a display device 
(TV, projector. etc). Content is encrypted at the
source device to prevent unauthorized copies
from being made.
■ 
HDMI (High Definition Multimedia
Interface)  
HDMI is an interface to enable the digital
transmission of video and audio data with
just a single connector. Since HDMI is
based on DVI, it is completely compatible
with DVI. The only difference between
HDMI and DVI is that HDMI supports
multi-channel audio.
Using HDMI, the HDD & DVD
RECORDER transmits a digital video and
audio signal and displays a vivid picture
on a TV having an HDMI input jack.
■ 
HDMI connection description
HDMI connector - Both uncompressed
video data and digital audio data 
(LPCM or Bit Stream data).
-  Though the HDD & DVD RECORDER
uses a HDMI cable, the HDD & DVD
RECORDER outputs only a pure digital
signal to the TV.
-  If TV does not support HDCP 
(High -bandwidth Digital Content
Protection), snow noise appears on the
screen.
NOTE
red
white
white
red
01082E_HR735_EUR_01~58  3/28/06 8:23 PM  Page 25