Samsung CLP-650 User Guide
Using Print Materials
4.4
3
Squeeze the paper width guide and slide it to the edge of
the paper without causing it to bend.
4
When you print a document, set the paper source to
Manual Feed and select the appropriate paper size and
type in the software application. For details, see the
Software Section.
type in the software application. For details, see the
Software Section.
5
Print the document.
6
Press the On Line/Continue button (
).
The printer picks up the print material and prints.
N
OTE
:
If you don’t press the button after a pause, the paper
will automatically fed into the printer.
7
After one page is printed, insert the next sheet into the
Multi-purpose Tray and press the On Line/Continue
button (
Multi-purpose Tray and press the On Line/Continue
button (
).
Repeat this step for every page to be printed.
Printing on Special Print
Materials
Materials
Printing on Envelopes
• Load envelopes into the Multi-purpose Tray only.
• Only use envelopes recommended for laser printers. Before
loading envelopes in the Multi-purpose Tray, make sure that
they are undamaged and are not stuck together.
• Do not feed stamped envelopes.
• Never use envelopes with clasps, snaps, windows, coated
linings, or self-stick adhesives.
To print on envelopes:
1
Open the Multi-purpose Tray and unfold the paper support.
2
Flex or fan the edge of the envelope stack to separate
them before loading.
them before loading.
3
Load the envelopes into the Multi-purpose Tray with the
flap side up. The end of the envelope with the stamp area
enters the printer first.
flap side up. The end of the envelope with the stamp area
enters the printer first.
4
Squeeze the paper width guide and slide it to the edge of
the envelope stack without causing it to bend.
the envelope stack without causing it to bend.
5
When you print, set the paper source to Multi-Purpose
Tray and the paper type to Envelope, and select the
Tray and the paper type to Envelope, and select the
appropriate size in the software application. For details,
see the Software Section.
see the Software Section.