Samsung CLP-650 User Guide
Solving Problems
7.5
3
Pull the tray open. After you pull it all the way out, lift up
the front part of the tray slightly to release the tray from
the printer.
the printer.
4
Remove the jammed paper by gently pulling it straight out
as shown below.
as shown below.
5
To replace the tray, lower the rear edge, align it with the
slot, and slide it into the printer.
6
After removing the jammed paper, check for paper which
may be jammed in other parts of the printer.
may be jammed in other parts of the printer.
7
Close the access door firmly. The printer will resume
printing.
C
AUTION
:
If the access door is not completely closed, the
printer will not operate.
In the Multi-purpose Tray
When you print using the Multi-purpose Tray and the printer
detects that there is either no paper or the paper has been
improperly loaded, a lamp turns on at the corresponding
location on the Status map. Also, “Jam0 In MP Tray” appears on
improperly loaded, a lamp turns on at the corresponding
location on the Status map. Also, “Jam0 In MP Tray” appears on
the display.
1
If the paper is not feeding properly, using the handle,
completely open the access door.
completely open the access door.
2
Remove the jammed paper by pulling in the direction
shown. To avoid tearing the paper, pull it out gently and
shown. To avoid tearing the paper, pull it out gently and
slowly.