Samsung ppm63m7 User Guide

1  Press the MENU button to display the menu.

2  Press the ▲ or ▼ button to select Setup, then press the 

ENTER button.

3  Press the ▲ or ▼ button to select Time, then press the 

ENTER button.

4  Select the desired option by pressing the ▲ or ▼ button, then 

press the 

ENTER button.

 

Available options: 

Clock Set, Sleep Timer, Timer1, Timer2, 

5  When you are satisfied with your setting, press the  

ENTER button.

6  Press the EXIT button to exit.
 

You can set the PDP Display clock so that the current time 

is displayed when pressing the 

INFO button on the remote 

control. You must also set the time if you wish to use the 

automatic on or off timers.

−  Press the ◄ or ► button to select 

Month, Day, Year, Hour,  

or 

Minute.

  Set these by pressing the ▲ or ▼ button.

➢ 

You can set the 

Month, Day, Year, Hour, and Minute directly by pressing the numeric buttons 

on the remote control.

➢ 

In the event of a power interruption or the set being turned off at the supply, the settings for the 

Clock will be lost.

 

You can select a time period of between 30 and 180 minutes after which the PDP Display 

automatically switches to standby mode.

−  Select the preset time interval (

Off, 30, 60, 90, 120, 150, 180) by pressing the ▲ or ▼ button.

 

You can set the On/Off timers so that the PDP Display will switch on or off automatically at the time 

you select.

☛

 You must set the clock first.

−  Press the ◄ or ► button to select the desired item below.

  Press the ▲ or ▼ button to adjust to the setting.

On Time : Select hour, minute, and No/Yes. (To activate the On time, set to Yes.)

Off Time : Select hour, minute, and No/Yes. (To activate the Off time, set to Yes.)

Repeat : Select Once, Everyday, Mon - Fri, Mon - Sat, or Sat - Sun.

Volume : Select the desired volume level.

Source : Select the desired external device.

➢ 

You can set the hour, and minute directly by pressing the number buttons on the remote control.

☛

 

When you set the timer “On”, the PDP Display will eventually turn off if no controls are operated for 3 

hours after the PDP Display was turned on by timer. This function is only available in timer “On” mode 

and prevents overheating, which may occur if a PDP Display is on for too long time.





























BN68-01364A-02Eng_1009.indd   20

2007-10-09   ¿ÀÈÄ 2:24:26