Polycom vsx7000 Reference Manual
System Commands
4 - 193
pip
Sets or gets the on-screen PIP mode. The PIP feature allows the near site to
adjust near-camera views while in a video conference.
Syntax
pip <get|on|off|auto|camera|swap|register|unregister|location>
pip location <get|0|1|2|3>
pip location <get|0|1|2|3>
Feedback Examples
•
pip on
•
pip off
•
pip auto
•
pip camera
•
pip swapped
Parameter
Description
get
Returns the current setting.
on
Enables PIP mode. The VSX system shows a PIP
window that remains in the lower right corner of the
screen until the video call is completed.
window that remains in the lower right corner of the
screen until the video call is completed.
off
Disables PIP mode.
auto
Causes the VSX system to show a PIP window when
the call is first connected and when the remote control
is not resting on a flat surface.
the call is first connected and when the remote control
is not resting on a flat surface.
camera
Causes the PIP window to appear when the selected
camera position is changed. The PIP window
disappears when the camera has finished moving.
camera position is changed. The PIP window
disappears when the camera has finished moving.
swap
Toggles the content of the PIP and the main display
between the near-site and far-site view.
between the near-site and far-site view.
register
Registers the system to give notification when PIP is
turned on or off.
turned on or off.
unregister
Unregisters the system to give notification when PIP is
turned on or off.
turned on or off.
location
Places the PIP window in the specified corner of the
screen:
0 = bottom right corner
1 = top right corner
2 = top left corner
3 = bottom left corner
get = Returns the current location
screen:
0 = bottom right corner
1 = top right corner
2 = top left corner
3 = bottom left corner
get = Returns the current location