Samsung tx-p2670 User Guide
15
Connecting Cable TV
You can connect different cable systems to your TV, including cable without a cable box,
and cable with a cable box that descrambles some or all channels.
and cable with a cable box that descrambles some or all channels.
Cable without a Cable Box
If you want to connect cable, and you do not need to use a cable box:
Plug the incoming cable
into the ANT A or ANT B
antenna terminal on the
rear of the TV.
into the ANT A or ANT B
antenna terminal on the
rear of the TV.
2
Plug the combiner into the
ANT A or ANT B
ANT A or ANT B
termi-
nal on the rear panel.
I
N S TA L L AT I O N
Antennas with 75-ohm Round Leads
Plug the antenna lead into
the ANT A or ANT B ter-
minal on the rear panel.
the ANT A or ANT B ter-
minal on the rear panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV. This procedure requires
an optional combiner-adaptor (available at most electronics shops).
the two antenna signals before connecting the antennas to the TV. This procedure requires
an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
leads to the combiner.
AA68-03263B-00_eng_Chapter2 4/21/04 5:31 PM Page 15