Samsung tx-p2670 User Guide
30
O
P E R AT I O N
Storing Channels in Memory
▼
Press the ENTER button at any
time to interrupt the memorization
process and return to the Channel
menu.
▼
Note: The TV must be connected to
an antenna in order to receive digital TV
signals.
Even if a particular channel is deleted from
Even if a particular channel is deleted from
the memory, you can always tune to that
channel directly by using the number
buttons on the remote control.
▼
Note: When Receiving a Digital Cable
Signal : If your cable service signal does not
comply with the ATSC(Advanced Television
System Committee) requirements, this prod-
uct may not operate properly.
6
Press the ENTER button
when channel memorization
is completed.
After pressing ENTER, it
returns to the Channel
menu.
when channel memorization
is completed.
After pressing ENTER, it
returns to the Channel
menu.
Press the EXIT button to
exit.
exit.
5
Press the … or † button
to select the antenna to
memorize, then press the
ENTER button.
The TV will begin memoriz-
ing all of the available
channels.
to select the antenna to
memorize, then press the
ENTER button.
The TV will begin memoriz-
ing all of the available
channels.
Adopts QAM for transmission
Yes
No
T V
Auto Program
Select the antennas to memorize
ANT A + ANT B
ANT A
ANT B
ANT A
ANT B
T V
Auto Program
Start
Start
Start
Start
Start
Channel Memory in Process
CATV Channel 15
Stop
Auto Program
Stop
16 channel were memorized
Air(ANT A) : 7, Cable(ANT B) : 9
16 channel were memorized
Air(ANT A) : 7, Cable(ANT B) : 9
Return
Auto Program
Notes
• STD, HRC and IRC identify various types of cable TV systems. Contact your local cable
• STD, HRC and IRC identify various types of cable TV systems. Contact your local cable
company to identify the type of cable system that exists in your particular area. At this
point the signal source has been selected. Proceed to “Storing Channels in Memory”.
point the signal source has been selected. Proceed to “Storing Channels in Memory”.
• Subscription cable services require service-specific requirement for viewing.
When selecting the Cable TV
system:
Press the … or † button to
select “Cable”, then press the
ENTER button.
Press the … or † button to
cycle through these choices:
“STD”, “HRC” or “IRC”, then
press the ENTER button.
system:
Press the … or † button to
select “Cable”, then press the
ENTER button.
Press the … or † button to
cycle through these choices:
“STD”, “HRC” or “IRC”, then
press the ENTER button.
Select the cable system
STD
HRC
IRC
IRC
T V
Auto Program
Air
None
Cable
None
Air
Cable
Cable
Air
ANT A : Air
ANT A : Cable
ANT A : Air, ANT B : Cable
ANT A : Cable, ANT B : Air
4
Press the … or † button to
select antenna connection,
then press the ENTER button.
select antenna connection,
then press the ENTER button.
Select the antenna connection
ANT A
ANT B
T V
Auto Program
Air
None
Cable
None
Air
Cable
Cable
Air
AA68-03263B-00_eng_Chapter3 4/21/04 5:30 PM Page 30