Samsung tx-r2435 User Guide

O

P E R AT I O N

24

Your TV can memorize and store all of the available channels for both “off-air” (antenna)

and cable channels. After the available channels are memorized, use the CH

and 

CH 

buttons to scan through the channels. This eliminates the need to change chan-

nels by entering the channel digits. There are three steps for memorizing channels:

selecting a broadcast source, memorizing the channels (automatic) and adding and delet-

ing channels (manual).

Before your television can begin memorizing the available channels, you must specify the

type of signal source that is connected to the TV (i.e., an antenna or a cable system).

Press the MENU button to 
display the menu.

Press the ▲ or ▼ button to
select “Channel”, then
press the ENTER button

Press the ▲ or ▼ button
to select “Air/CATV”.

Note: STD, HRC and IRC  identify various types of cable
TV systems. Contact your local cable company to identify
the type of cable system that exists in your particular area.

At this point the signal source has been selected. Proceed
to “Storing Channels in Memory” (next page).

ˆˆ

ˆˆ

ˆˆ

ˆˆ

Repeatedly press the 
ˇ 

 or ˆ button to cycle

through these choices:
“Air” (antenna) “STD”,
“HRC” or “IRC” (all cable
TV)  

Press the EXIT button to
exit.

ˆˆ

ˆˆ