Belkin f1dc108c User Manual

32

Activating this button will take the user to the “Advanced Dialog” screen.

When “Disable Viewing” is checked, only another administrator may view 
channels occupied by the administrator. This function will be active by default  
in the OSD by design. For security reasons, the Admin needs to disable this if 
need be. 

Checking this box allows a Rack-Mount Console KVM Switch set to BANK 00 
to communicate with other BANKs in a daisy-chain configuration. This affects 
front-panel operations, and other operational parameters. Whenever the state 
of this check box is changed, the following message will be displayed: “This will 
reset the KVM to change this setting”. If the user selects “OK”, the Rack-Mount 
Console KVM Switch will immediately reboot in the new configuration. By default, 
a Rack-Mount Console KVM Switch set to BANK 00 is configured as standalone 
(the check box is cleared). 

Checking one of these boxes (0, 1, 2, or 3) assigns a BANK address for the 
Rack-Mount Console KVM Switch. Selecting “0” sets the BANK address to 00, 
selecting “1” sets the BANK address to 01, and so on. The default BANK address 
for the Rack-Mount Console KVM Switch is set at 00 (box “0” is checked).