Belkin f1pg111en Quick Setup Guide
Make sure you have
the following:
Belkin Message
Manager
Belkin Easy
Install Wizard
Software CD
Auto Setup
Users of
Windows
®
98SE
Windows Me
Windows 2000
Windows XP
Windows 2000
Windows XP
can use Easy Install Wizard
IMPORTANT: Run the Easy Install
Wizard from the computer that is
directly connected to the cable or
DSL modem. DO NOT CONNECT
the Belkin Message Manager at
this time.
Wizard from the computer that is
directly connected to the cable or
DSL modem. DO NOT CONNECT
the Belkin Message Manager at
this time.
Make sure you have the following
1
Connect
4
Install
3
Connect
5
Ethernet
Cable
1.
Install
Install the Easy Install Wizard Software
Power
Supply
Supply
Manual Setup
Advanced Users Go to
the “Alternate Setup
Method” section of
your User Manual.
the “Alternate Setup
Method” section of
your User Manual.
Install
2
1.1
Shut down any programs that are running on your computer at
this time.
1.2
Turn off any firewall or Internet connection sharing software on
your computer.
1.3
Insert the Easy Install Wizard software CD into your CD-ROM
Drive. The Easy Installation Wizard screen will automatically
appear on your screen within 15 seconds. If it does not, select
your CD-ROM drive from “My Computer” and double-click on
the file named “Setup” on the CD-ROM.
appear on your screen within 15 seconds. If it does not, select
your CD-ROM drive from “My Computer” and double-click on
the file named “Setup” on the CD-ROM.
1.4
You will see the Wizard’s
welcome screen.
1.5
Easy Install will show you a
progress screen each time a
step in the setup has been
completed. Each time you
see the progress screen, click
“Next” when you are ready to
move to the next step.
step in the setup has been
completed. Each time you
see the progress screen, click
“Next” when you are ready to
move to the next step.
1.6
The Wizard will now examine
your computer’s network
settings and gather information
needed to complete the Belkin
Message Manager’s connection
to the Internet. When the
Wizard is finished examining
your computer, click “Next”
to continue.
settings and gather information
needed to complete the Belkin
Message Manager’s connection
to the Internet. When the
Wizard is finished examining
your computer, click “Next”
to continue.
The Wizard will walk you through connecting your Message Manager to
your computer and modem. Follow the steps on the screen using the
pictures as a guide.
your computer and modem. Follow the steps on the screen using the
pictures as a guide.
2.
Connect
Connect the Message Manager to your Modem
and Computer
and Computer
Connect
6
Next
(click)
Telephone
Cord
User
Manual
Features
Guide
Next
(click)
Next
(click)
2.1
Locate the cable connected
between your modem and
the networking port on your
computer. Unplug this cable
from the computer and plug
it into the WAN port on the
Belkin Message Manager.
the networking port on your
computer. Unplug this cable
from the computer and plug
it into the WAN port on the
Belkin Message Manager.
Next
(click)
STOP! IMPORTANT!
•
If you are currently sharing your cable or DSL broadband access using a
router/gateway you can plug the Belkin Message Manager into one of the
available networking ports on your router/gateway. Refer to the section
of your manual titled “Connecting your Message Manager to a Router/
Gateway”. If you are going to connect the Belkin Message Manager directly
to a router/gateway you
router/gateway you can plug the Belkin Message Manager into one of the
available networking ports on your router/gateway. Refer to the section
of your manual titled “Connecting your Message Manager to a Router/
Gateway”. If you are going to connect the Belkin Message Manager directly
to a router/gateway you
DO NOT need to run this Installation Wizard.
•
If you currently have broadband and do not have a router/gateway, then you
may continue with Easy Install.
may continue with Easy Install.
2.2
Locate the Ethernet cable that
is included with your Message
Manager. Plug one end of this
cable into the LAN port on
your Message Manager. Plug
the other end of the cable
into the networking port on
your computer.
Manager. Plug one end of this
cable into the LAN port on
your Message Manager. Plug
the other end of the cable
into the networking port on
your computer.
2.3
Connect your analog phone to
Phone Port of your Message
Manager. Plug the Phone line
from your wall outlet to the
Phone Line Port on the Belkin
Message Manager.
Manager. Plug the Phone line
from your wall outlet to the
Phone Line Port on the Belkin
Message Manager.
Next
(click)
Next
(click)
2.4
This step instructs you to
locate the power supply that
is included with your Message
Manager. Plug the power
supply’s small connector
into the power jack on the
Message Manager. Plug the
power supply into an empty
power outlet.
is included with your Message
Manager. Plug the power
supply’s small connector
into the power jack on the
Message Manager. Plug the
power supply into an empty
power outlet.
2.5
Look at the lights on the
front of your Belkin Message
Manager. Make sure the
appropriate lights are ON.
Refer to the Easy Install
software on your computer’s
screen for more details.
Manager. Make sure the
appropriate lights are ON.
Refer to the Easy Install
software on your computer’s
screen for more details.
Next
(click)
Next
(click)
NOTE for Windows Users:
If the Easy Install Wiizard does not start up
automatically, select your CD-ROM drive from “My
Computer” and double-click on the “Setup” on the
CD-ROM.