Belkin f1dv104 User Manual
3
OVERVIEW
Equipment Requirements
Cables
To connect to the computer, the Splitter requires one VGA cable. Video
resolution support of up to 2048x1536@85Hz requires use of a 75-Ohm
coaxial VGA cable to preserve signal integrity. VGA cables must have
HDDB15 female-to-HDDB15 male connectors. The following cable is
recommended for your Splitter.
resolution support of up to 2048x1536@85Hz requires use of a 75-Ohm
coaxial VGA cable to preserve signal integrity. VGA cables must have
HDDB15 female-to-HDDB15 male connectors. The following cable is
recommended for your Splitter.
OmniView Video Extension Cable
F1D9003-XX
(VGA Female to Male Style)
(-XX denotes length in feet)
Monitors
• VGA
• SVGA
• MultiSync®
Feature Overview
Video Resolution
The Splitter supports video resolutions up to 2048x1536@85Hz through a
400MHz video bandwidth.
400MHz video bandwidth.
Light-Emitting Diode
The LED display on the front panel of the Splitter functions as a status
monitor. An LED above each direct-access monitor selector lights to
indicate which monitors are currently active.
monitor. An LED above each direct-access monitor selector lights to
indicate which monitors are currently active.
Direct-Access Monitor Selectors
Located conveniently on the front panel of the Splitter, direct-access
monitor selectors allow for simple, manual monitor selection. Each button
controls a monitor.
monitor selectors allow for simple, manual monitor selection. Each button
controls a monitor.
OVERVIEW
2
P74179-F1DV104-8-man.qxd 3/12/03 9:35 AM Page 2