Mio 168rs User Guide

 

change these settings unless your network administrator instructs you to do 
so. 

4.  If necessary, connect the network card to the network by using a network 

cable.  

NOTE: You may need proxy server and VPN connection settings. For more information, 
see Pocket PC online help and your network administrator. 

 

Starting and Ending a Network Card Connection 

To start the connection, install the network card and connect the network cable. 
Then, use the desired program. For example, switch to Pocket Internet Explorer 
and browse to a Web page. Your Pocket PC will automatically connect. 

To end the connection, remove the card from your Pocket PC. 

Wireless Network Connection 

Use a wireless network card to connect to a wireless network without physical 
cables. 

Before creating the connection, you need to: 

 

Have a wireless network card (SD IO). (For installation information, see the 
documentation supplied with the product.) 

 

If necessary, obtain the authentication information from your network 
administrator. 

Creating a Wireless Connection to a Network 

Networks that you have already configured are preferred networks and are listed 
in Wireless networks. You can select to connect to only preferred networks or 
have your Pocket PC search for and connect to any available network whether it 
is preferred or not. 

1.  Insert the wireless network card into your Pocket PC. (For information, see 

the documentation that came with the product.) 

2.  To manually enter information, tap   

 

 tab   

   

   

 tab 

. If the network was 

detected, the next step is not necessary.