Boss Audio bv9972 User Guide

Page of 24
BASIC OPERATION
1. SOURCE ON/OFF
Press SRC button on panel or SOURCE button on remote control quickly to power on. 
Press SRC button on panel or SOURCE button on remote control longer to power off.
2. PLAYING SOURCE CHOOSE
Press SOURCE button on remote control, unit will switch sources in the following 
sequence: RADIO → DVD → AUX 
3. MUTE CONTROL
Press MUTE button on panel or MUTE button on remote control shortly to turn off 
sound output, press again to back to sound output.
4. VOLUME ADJUSTMENT
1) Press VOL+/VOL- button on panel, VOL+/VOL- button on remote control or touch
    button on display to adjust volume level.
2) The volume setting on this unit is 0 - 39.
BASS, TREBLE, BALANCE & FADER ADJUSTING (SELECT)
Press SEL button on remote control  to choose your desired Bass, Treble, Balance & 
Fader level:
NOTE:
1) DVD playing mode, MBP & User will be automatically activated.
2) After 5 seconds you choose desired mode, do not adjust volume button. The mode will 
    automatically take you back to status before adjustment.
5. RESET
1) If unit is not working correctly, you should press the RES button. This will reset the 
    radio and should start working correctly afterwards. 
2) After reset, all settings will resume back to the factory default settings.
VOL
BAS
TRE
L/R
F/R
INSTRUCTIONS
INSTRUCTIONS
WIRING DIAGRAM
This player is equipped with ISO standard connector, please follow below instruction:
 Yellow – 12 V Constant
 Black – Ground wire
 Blue - Power Antenna / Remote Amp Turn On
 Orange – Back-Up Camera Trigger (+)
 Pink – Parking Brake (-)
 White/White black - Left front speaker (+-)
 Purple/Purple black - Right rear speaker (+/-)
 Green/Green black - Left rear speaker (+/-)
 Red - ACC ON (+12V)
 Grey/Grey black - Right front speaker (+/-)
Note: 
The “PARKING BRAKE” wire must be connected to the parking brake system 
of your car. When the parking brake is engages, the LCD will be allowed to view 
your video. If not, the screen will produce an image saying, “PARKING BRAKE”. 
This is a safety feature designed for the driver not to watch a video while driving. 
The video output on this unit will not be affected by this.