Sony kdl-40xbr2 Operating Guide

KDL-40XBR2/KDL-46XBR2/KDL-40XBR3/KDL-46XBR3

2-678-575-11(1)

D:\WINNT\Profiles\fujii\Desktop\2678575111\01US03INS.fm

This TV can be installed on a wall by using a wall-mount bracket (sold 
separately). Be sure to use the specified Wall-Mount Bracket (see page 3). 
Before mounting the TV on a wall, you must remove the Table-Top Stand 
from the TV. Follow the steps below to remove the Table-Top Stand, and 
then use the instruction guide that came with the Wall-Mount Bracket (sold 
separately) to mount the TV on the wall.

Follow the simple steps below to remove the Table-Top Stand:

Disconnect all the cables from the TV.

Start removing the screws from the ones on top. (See illustration below) 
Do not remove any other screws from the TV.

When screws are removed, lift the TV out. 
Make sure that you carry out this task with two people. Do not attempt 
to lift the TV by yourself.

For bracket installation, refer to the instruction guide provided by the Wall-
Mount Bracket model for your TV. Sufficient expertise is required in 
installing this TV, especially to determine the strength of the wall for 
withstanding the TV’s weight. For product protection and safety reasons, 
Sony strongly recommends that you use the Wall-Mount Bracket model 
designed for your TV and the wall-mounting of your TV should be 
performed by Sony dealers or licensed contractors.

✍

Do not remove the Table-Top Stand for any reason other than to wall- 
mount the TV.

✍

Be sure to store the removed screws and Table-Top Stand in a safe 
place until you are ready to reattach the Table-Top Stand. Keep the 
screws away from small children.