Infocus IN2112 Quick Setup Guide
S-Video Cable
1
2
4
1
Connect the power cord to the projector
and to an electrical outlet
3
Turn on the projector
4
Wait for the lamp to warm up
5
Turn on computer or other source
6
Change source if needed
The power light on the projector will light amber.
Touch the power light (or press power on the remote).
The power light will start blinking green.
The power light will start blinking green.
After a few seconds, the power light will stop blinking and
turn green. It can take a minute for the lamp to reach
full brightness.
turn green. It can take a minute for the lamp to reach
full brightness.
If needed, press source (on the projector or remote) to view
the source. You may have to press it more than once.
the source. You may have to press it more than once.
You may need to press a specific key combination to activate
your laptop's external video port. On most laptops, hold down
the FN key while pressing a key labeled CRT/LCD, LCD/VGA,
a monitor icon , or similar. Key combos for popular models:
your laptop's external video port. On most laptops, hold down
the FN key while pressing a key labeled CRT/LCD, LCD/VGA,
a monitor icon , or similar. Key combos for popular models:
Warning: Do not look directly into the lens
while the projector is being used.
while the projector is being used.
Important: If there is still no video, restart your
computer (first make sure it's connected to the
projector and the projector is turned on).
computer (first make sure it's connected to the
projector and the projector is turned on).
Apple F7
Dell Fn+F8
Fujitsu Fn+F10
Dell Fn+F8
Fujitsu Fn+F10
Sony Fn+F7
Toshiba Fn+F5
Toshiba Fn+F5
HP/Compaq Fn+F4 or Fn+F6
IBM ThinkPad Fn+F7
IBM ThinkPad Fn+F7
Turn on projector and source
Unpack the box
Here's what's included:
Put batteries in the remote
The remote uses 2 AA batteries.
Connect source
Color-coded connections make it easy.
You can connect more than one source if needed.
Projector
Computer Cable
Save the box and packing materials.
Remote
Power Cable
The top of your projector includes
a convenient indicator panel with
symbols that light up to show
important status.
a convenient indicator panel with
symbols that light up to show
important status.
For details, see Troubleshooting.
USB Cable
Regulatory model V2000 and M2100
Status Indicator Panel
3
T U R N O V E R
2
Slide open the lens cover
Please read the safety instructions booklet
before setting up the projector.
i
Audio Out
L R
Video
Out
Carry Case
OR
Computer Cable (included)
Computer
Connect to:
DVD, VCR
1
Connect video using a
Composite Video cable
www.infocus.com/store part no. SP-CPSTVID-5M or SP-SVIDEO-10M
2
Connect audio using a
Mini Plug Audio Y-Cable
Available from A/V dealer or retailer
Got an Apple computer?
You may need an adapter. For more
information, see How-To Guides at
www.infocus.com/support/howto
information, see How-To Guides at
www.infocus.com/support/howto
OR
Connect to:
Other kinds of sources
How-To Guides are available at www.infocus.com/support/howto
Connect to:
Computer
Power/Standby
Service Required
High Temperature
Replace Lamp
5-10 sec.
source
S-Video
Out
or an
S-Video cable
!
2
3
1
Please dispose of batteries in an environmentally proper manner.
Buy a Full-Featured Remote and Other Custom Accessories
www.infocus.com/store
Complete laptop activation chart at www.infocus.com/support
Quick Start Guide English
For other languages, see booklet
For other languages, see booklet
–
Français – voir la brochure
Deutsch – siehe Broschüre
Español – ver folleto
Italiano – vedi opuscolo
Nederlands – zie boekje
Português – consulte livreto
Svenska – se häftet
Русский – см. буклет
Deutsch – siehe Broschüre
Español – ver folleto
Italiano – vedi opuscolo
Nederlands – zie boekje
Português – consulte livreto
Svenska – se häftet
Русский – см. буклет
한국어 – 소책자 참조
Mini Plug Audio Y-Cable
Composite Video Cable
DVD or VCR*
Good
*Also for game console or cable
box.
box.
010-0733-00
*010-0733-00*
Better
OR