projectiondesign action three 1080 User Guide

english

HDMI to DVI cable

RS232 cable

The Crystalio II projector control is a system for controlling the projector 

through the  

video processor. To control the projector, the RS232 or network connector 

must be connected. see illustration for details. Read the crystalio and the 

projector userguide for further information.

From the Crystalio II to the Action! model three 1080, only a single link of 

connection is needed for basic operation. This link is a HDMI-to-DVI cable 

that can be as long as up to 25m / 75ft. This cable will carry a 1920x1080 

progressive signal, processed in the Crystalio II. In addition, for projector 

control, a similar length RS232 cable should be connected. This will give full 

access to all functions of the projector, through the same menu interface as

that of the Crystalio II.

The Crystalio II will process and forward all incoming signals to the 

projector, processed and scaled up to it’s native 1920 x 1080 resolution. 

This will be the same whether the input is standard TV or DVD signals at 

480i or 576i (NTSC or PAL), or whether the input is High Definition, 1080i or 

720p.

Main features of the Action! model three 1080 / Crystalio II combination 

include;

    • Broadcast Quality video processing.

    • Single Link between source connections and projector unit.

    • Industry’s best connectivity and compatibility.

    • Single remote control and menu interface for all system control.