Lab.gruppen fp 2200 User Guide

 

 

 

 

 

 

This equipment conforms to the requirements of the EMC directive 89/336/EEC, amended 
by 92/31/EEC and 93/68/EEC and the requirements of the Low Voltage Directive 
73/23/EEC, amended by 93/68/EEC. 
 

Standards applied   

EMC Emission 

EN55103-1, E3 

 

 

EMC Immunity 

EN55103-2, E3, with S/N below 1% at normal operation level. 

 

 

Electrical Safety 

EN60065, Class I

   

 
This equipment is tested and approved according to the 
U.S. safety standard ANSI/ UL 6500 and Canadian 
safety standard CSA E60065-00. ETL made the tests 
and they are a Nationally Recognized Testing 
Laboratory (NRTL).  
 
 

The lightning symbol within a triangle is 

intended to alert the user to the 

presence of un-insulated “dangerous voltage” 
within the amplifier’s enclosure that may be of 
sufficient magnitude to constitute a risk of 
electric shock to humans. 

The exclamation point within a triangle is 

intended to alert the user to presence of 

important operating and service instructions in 
the literature accompanying the product. 

!

 

To reduce risk of fire or electric shock, do not 
expose this apparatus to rain or moisture. 

To reduce the risk of fire or electric shock, do 
not remove screws. No user-serviceable parts 
inside. Refer servicing to qualified service 
personnel. 

1.  Keep this manual for future reference. 
2.  Heed all warnings. 
3.  Follow all instructions. 
4.  Do not use this unit near water. Do not spill water or other liquids into or on the unit. Do not 

operate the amplifier while wet or standing in liquid. 

5.  Clean only with dry cloth. 
6.  Do not block the air intake or exhaust ports. Install the unit in accordance with the instructions. 

!

7.  Do not operate the amplifier near heat producing devices such as radiators, heat registers, stoves 

or other apparatus that produce heat. 

8.  Always operate the unit with the chassis ground wire connected to the electrical safety earth. Do 

not defeat the safety purpose of a grounding-type plug. A grounding type plug has two pins and 
a third grounding prong. The third prong is provided for your safety. If the provided plug does 
not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 

9.  Connect only to AC power outlets rated 200-240V, 50-60Hz.