ICOM ic-207h Instruction Manual
SETTING A FREQUENCY
3
15
■ Preparation
D Turning power ON/OFF
Push [PWR] for 1 sec. to turn power ON or OFF.
D Operating band
The IC-207H can receive/transmit on the 144 MHz and
430(440) MHz bands, or receive only on the avionics band
(USA version only).
430(440) MHz bands, or receive only on the avionics band
(USA version only).
Push [BAND] one or more times to select the desired operat-
ing band.
ing band.
• The frequency changes to indicate the selected band.
• The operating band cannot be changed unless you are in VFO
• The operating band cannot be changed unless you are in VFO
mode (see right).
Push [BAND] one or more times to select the de-
sired operating band.
sired operating band.
D VFO and memory modes
The transceiver has 2 normal operating modes: VFO mode
and memory mode.
and memory mode.
Push [V/MHz] to select VFO mode when the transceiver is
not in VFO mode.
not in VFO mode.
• If VFO mode is already selected, the digits below 100 kHz disap-
pear. In this case, push [V/MHz] again (or push twice depending on
version).
version).
Push [VFO] to select VFO mode.
Push [PWR] for 1 sec.
BAND
Appears when memory mode
is selected.
is selected.
VFO mode is selected.
H I
1
9
5
H I
1
9
5
d
VFO