ICOM ic-207h Instruction Manual

3

SETTING A FREQUENCY

19

■ Using the keypad

The frequency can be directly set via numeral
keys on the microphone.

Ä

Push [BAND] to set the operating band, if necessary.

Å

Push [VFO] to select VFO mode.

Ç

Push [ENT] to activate the keypad for digit input.

É

Push 5 keys to input a frequency.

• When a digit is mistakenly input, push [ENT] to clear the input,

then input from the 1st digit.

• Pushing [CLR] clears input digits and retrieves the frequency.

Ñ

Push [Y] or [Z] to make adjustments below the 10 kHz
digit, if desired.

[EXAMPLE]: Setting the frequency to 145.360 MHz.

[EXAMPLE]: Setting the frequency to 446.325 MHz. (When the 25 kHz tuning step is selected in UHF.)

then

then

ENT