ICOM ic-207h Instruction Manual

ii

UNPACKING

Accessories included with the transceiver:

➀

DC power cable (OPC-346)............................................. 1

➁

Mobile mounting bracket ................................................. 1

➂

Microphone (HM-98*) ...................................................... 1

➃

Fuse (20 A)...................................................................... 1

➄

Knob bolt (M4

× 8) ........................................................... 4

➅

Mounting bolt (M5

× 12)................................................... 4

➆

Nut (M5)........................................................................... 4

➇

Spring washer (M5) ......................................................... 4

➈

Flat washer (M5).............................................................. 4

➉

Self-tapping screws (A0 5

× 16)....................................... 4

*Some versions are supplied with the HM-96 instead.

allow children to play with any radio equipment

containing a transmitter.

During mobile operation, 

operate the transceiver

without running the vehicle’s engine. When transceiver power
is ON and your vehicle’s engine is OFF, the vehicle’s battery
will soon become exhausted.

The transceiver will become hot when

operating it continuously for long periods.

using or placing the transceiver in areas with tem-

peratures below –10°C (+14°F) or above +60°C (+140°F) or
in areas subject to direct sunlight, such as the dashboard.

the use of chemical agents such as benzine or alcohol

when cleaning, as they can damage the transceiver surfaces.

Icom microphones only (supplied or optional). Other

manufacturer’s microphones have different pin assignments
and may damage the transceiver if attached.

➀

➁

➂

➃

➄

➅

➉
➆

➇

➈

Note that in this manual, sections beginning with a
microphone icon (as at left) designate operation via
the HM-98 microphone.