ICOM ic-207h Instruction Manual
10
PRIORITY WATCH
45
■ Priority watch operation
➀
Push [BAND] to select a band, if necessary.
➁
Select VFO mode; then, set an operating frequency.
➂
Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push
for 1 sec. to start
memory scan.
For call channel watch:
Select the call channel by pushing [M/CALL] once or twice.
For call channel watch:
Select the call channel by pushing [M/CALL] once or twice.
➃
Push
for 1 sec. to start the watch.
• The transceiver checks the memory or call channel frequency
every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 43)
• While the watch is pausing, pushing the selected band’s
[M/CALL] resumes the watch manually.
➄
Push [M/CALL] while the display shows the VFO frequency
to stop the watch.
to stop the watch.
PRIO
SCAN
While pausing on the
memory or call chan-
nel, “PRIO” flashes.
memory or call chan-
nel, “PRIO” flashes.
H I
M
1
9
5
PRIO
Ä
Push [BAND] to select the desired band, if nec-
essary.
essary.
Å
Select VFO mode; then, set an operating fre-
quency.
quency.
Ç
Set the watching channel(s).
For memory channel watch:
Push [MR] then [Y] or [Z] to select the desired
memory channel.
For memory scan watch:
Push [MR] then [
Push [MR] then [Y] or [Z] to select the desired
memory channel.
For memory scan watch:
Push [MR] then [
➁SCAN] to start the memory
scan.
For call channel watch:
Push and hold [
For call channel watch:
Push and hold [
(MR)
CALL] to select the call
channel.
É
Push [
➂PRIO] to start the watch.
• The transceiver checks the memory or call channel
frequency every 5 sec.
• The watch resumes according to the selected scan
resume condition. (p. 43)
• To resume the watch manually while pausing, push
[
➂PRIO] or [ECLR].
Ñ
To stop the watch, push [ECLR] once (or twice
while watch pauses).
while watch pauses).
PRIO
3