ICOM ic-207h Instruction Manual
11
DTMF MEMORY ENCODER
48
■ Transmitting a DTMF code
D Using the DTMF memory function
(automatic transmission)
The selected DTMF code is transmitted at each push of the
PTT switch when the DTMF memory encoder is turned ON.
PTT switch when the DTMF memory encoder is turned ON.
➀
Push
for 1 sec. to turn the DTMF memory encoder
ON.
• “d” appears in place of the 100 MHz digit.
➁
Push [SET] to enter the programming condition.
➂
Rotate the tuning dial to select the desired DTMF memory
channel.
channel.
➃
Push [PTT] to transmit the selected DTMF code.
• At each push of [PTT], the selected DTMF code is transmitted.
• The speaker emits the DTMF tones sent.
• The speaker emits the DTMF tones sent.
➄
Push
for 1 sec. to cancel the function.
• “d” disappears.
Ä
Push [FUNC] then [
➅DTMF] to turn the DTMF
memory encoder ON.
• “d” appears in place of the 100 MHz digit.
Å
Push [FSET] to enter the programming condition.
Ç
Push [Y] or [Z] to select the desired channel.
É
Push [PTT] to transmit the selected DTMF
code.
code.
• Each push of [PTT], transmits the DTMF code.
Ñ
Push [ECLR] to cancel the function.
DTMF
DTMF
D Transmitting a DTMF memory channel directly
Ä
Push [FUNC] then [
➅DTMF] to turn the DTMF
memory encoder ON.
• “d” appears in place of the 100 MHz digit.
Å
Push [DTMF-S], then push the desired DTMF
channel number.
channel number.
• “0” to “9” and “A” to “D” are available for channel
numbers.
Ç
Push [DTMF-S] again to deactivate the DTMF
setting.
setting.
É
Push [ECLR] to turn the DTMF memory en-
coder OFF.
coder OFF.
• When the DTMF memory encoder is turned ON con-
tinuously, each push of the PTT transmits the previ-
ously selected DTMF code.
ously selected DTMF code.
DTMF
6
DTMF S