ICOM ic-207h Instruction Manual
13
WIRELESS OPERATION
54
■ EX-1759 installation
The EX-1759
INFRARED RECEIVER
can be installed for 2 differ-
ent purposes depending on the HM-90 charger. This is be-
cause the EX-1759 has both an infrared receiver and a
microphone connector which contains microphone charging
capabilities.
cause the EX-1759 has both an infrared receiver and a
microphone connector which contains microphone charging
capabilities.
• When using the connector for a microphone charger
Attach the EX-1759 to a suitable location for receiving in-
frared signals and where it can be connected to a cable, e.g.
the console, etc.
Attach the EX-1759 to a suitable location for receiving in-
frared signals and where it can be connected to a cable, e.g.
the console, etc.
NOTE: DO NOT attach the EX-1759 where it will be sub-
ject to direct sunlight as it cannot detect infrared signals
under such conditions.
ject to direct sunlight as it cannot detect infrared signals
under such conditions.
• Optional infrared sub receiver
An optional EX-1513
An optional EX-1513
INFRARED SUB RECEIVER
is available to
increase the remote control reliability and extend the control-
lable area. Connect the EX-1513 to the inside connector of
the EX-1759.
lable area. Connect the EX-1513 to the inside connector of
the EX-1759.
NOTE: The supplied microphone, HM-98, can be con-
nected and used with the EX-1759, however, the optional
wireless microphone cannot be used in such a case.
nected and used with the EX-1759, however, the optional
wireless microphone cannot be used in such a case.
(When using the mic
connector for mic
charging.)
connector for mic
charging.)
The installation clip can be oriented in 1 of 4 ways.
EX-1759