ICOM ic-2100h Instruction Manual

43

10

PRIORITY WATCH

■

➀

Select VFO mode; then, set an operating frequency.

➁

Set the watching channel(s).

For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push [

(V/MHz)

SCAN] for 1 sec.

to start memory scan.
For call channel watch:
Select the call channel by pushing [M/CALL] once or twice.

➂

Push [

(M/CALL)

PRIO] for 1 sec. to start the watch.

• The transceiver checks the memory or call channel frequency

every 5 sec.

• The watch resumes according to the selected scan resume con-

dition. (p. 41)

• While the watch is pausing, pushing [M/CALL] resumes the

watch manually.

➃

Push [M/CALL] while the display shows the VFO frequency
to stop the watch.

While pausing on the
memory or call channel
“PRIO” flashes.

Ä

Select VFO mode; then, set an operating fre-
quency.

Å

Set the watching channel(s).

For memory channel watch:
Push [MR] then [

Y

] or [

Z

] to select the desired

memory channel.
For memory scan watch:
Push [MR] then [

➁

SCAN] to start the memory

scan.
For call channel watch:
Push and hold [

(MR)

CALL] to select the call

channel.

Ç

Push [

➂

PRIO] to start the watch.

• The transceiver checks the memory or call channel

frequency every 5 sec.

• The watch resumes according to the selected scan

resume condition. (p. 41)

• To resume the watch manually when paused, push

[

➂

PRIO] or [

E

CLR].

É

To stop the watch, push [

E

CLR] once (or twice

while watch is paused).

PRIO

3