Maxent mx-20v2 User Manual
14
Using Composite Input
Display Connections
Connecting TV or CATV
Connecting to TV or Cable TV
Make sure your monitor is equipped with a TV tuner. You can tell by looking at the connection jacks located
on the back of the monitor. If there is a threaded-screw type of connector (called the RF connector), then you
have a TV tuner. If you do not see this type of connector, then you do not have a TV tuner installed.
on the back of the monitor. If there is a threaded-screw type of connector (called the RF connector), then you
have a TV tuner. If you do not see this type of connector, then you do not have a TV tuner installed.
Connecting a VCR
Using S-Video Input
Connect the RF cable from the antenna or cable
socket to the RF connector labeled as TV on
the back of the monitor.
socket to the RF connector labeled as TV on
the back of the monitor.
Connect the red (R) and white (L) audio jacks
from the VCR to the (R) and (L) audio-in jacks
located next to the S-Video connector.
from the VCR to the (R) and (L) audio-in jacks
located next to the S-Video connector.
Note:
There are two sets of S-Video inputs
provided.
provided.
Connect the S-Video (4-pin DIN) connector from
the VCR to the S-Video input on the back of
monitor.
the VCR to the S-Video input on the back of
monitor.
Connect the yellow (video) out connector from
the VCR to the yellow video input on the back of
monitor.
the VCR to the yellow video input on the back of
monitor.
Note:
There are two sets of composite inputs
provided.
provided.