Olympus XZ-10 User Guide
23
EN
Basic photography
2
Sequential shooting/using the self timer
The camera will take sequential photos while the shutter button is pressed all the way
down. Alternatively, the self-timer can be used for self- or group-portraits or to reduce
camera shake when the camera is mounted on a tripod or otherwise fixed in place.
down. Alternatively, the self-timer can be used for self- or group-portraits or to reduce
camera shake when the camera is mounted on a tripod or otherwise fixed in place.
1
Press the j
Y button (G) to display the direct menu.
2
Select an option using
HI and press
Q.
o
Single-frame shooting
Shoots 1 frame at a time when the shutter button
is pressed (normal shooting mode).
is pressed (normal shooting mode).
j
Sequential shooting
Photographs are taken at about 5 frames per
second (fps) while the shutter button is pressed all
the way down.
second (fps) while the shutter button is pressed all
the way down.
O
High-Speed
Photographs are taken at about 15 frames per
second (fps) while the shutter button is pressed
all the way down. Available only if [
second (fps) while the shutter button is pressed
all the way down. Available only if [
i](Natural) is
selected for [Picture Mode].
7
BKT
While the shutter button is pressed all the way
down, photographs are taken with automatically
changing the settings for each frame (bracket
photography).
down, photographs are taken with automatically
changing the settings for each frame (bracket
photography).
Y12s Self-timer 12 SEC
Press the shutter button halfway to focus, the rest
of the way down to start the timer. First, the self-
timer lamp lights up for approximately 10 seconds,
then it blinks for approximately 2 seconds and the
picture is taken.
of the way down to start the timer. First, the self-
timer lamp lights up for approximately 10 seconds,
then it blinks for approximately 2 seconds and the
picture is taken.
Y2s Self-timer 2 SEC
Press the shutter button halfway to focus, the rest
of the way down to start the timer. The self-timer
lamp blinks for approximately 2 seconds, and then
the picture is taken.
of the way down to start the timer. The self-timer
lamp blinks for approximately 2 seconds, and then
the picture is taken.
$
Notes
• To cancel the activated self-timer, press the j
Y button.
• During sequential shooting, focus, exposure, and white balance are locked at the first
frame.
• Bracketing is available only when [Bracketing] (P. 44) is selected.
#
Cautions
• During sequential shooting, if the battery check blinks due to low battery, the camera
stops shooting and starts saving the pictures you have taken on the card. The camera
may not save all of the pictures depending on how much battery power remains.
may not save all of the pictures depending on how much battery power remains.
• Fix the camera securely on a tripod for self-timer shooting.
• If you stand in front of the camera to press the shutter button halfway when using the self-
• If you stand in front of the camera to press the shutter button halfway when using the self-
timer, the photograph may be out of focus.