Olympus c-700 ultra zoom Quick Setup Guide

:Records movies.

A/S/M :Sets controls for Aperture-priori-

ty auto exposure/Shutter-priority
auto exposure/Manual exposure.

P

:Programmed auto exposure

(several menu items).

:Portrait

:Sports Scene

:Landscape

AUTO:Full automatic exposure with

one press of the shutter button.

:Displays pictures.

M

ENU

1

2

4

3

Note:The Top menu and avail-

able menu functions vary
depending on the Mode
dial setting. (See the
Reference Manual for
more details.)

The Top menu functions can be changed to
your liking in the “P” and “A/S/M” modes
(SHORTCUT setting).

Brings up CAMERA menu

Brings up PICTURE menu

Brings up CARD menu

Brings up SETUP menu

 

Runs through all saved pictures one after another (slide-show).

 

Plays back movies.

Shows 9-frame indexes of still-shots from movies in
order to easily check the movies' contents.

Edits recorded movies.

Focuses (half press) or
shoots (full press).

Pops up the Flash.

 

Sets the record mode. (TIFF/SHQ,/HQ/SQ)

Adjusts the white balance according to the light source.
(AUTO/PRESET/

)

Allows you to make fine changes to the white balance.

Adjusts the sharpness of images.
(HARD/NORMAL/SOFT)

Adjusts the contrast of images. (HIGH/NORMAL/LOW)

Formats cards (all images on the card are deleted).

 

Selects whether to keep the current camera settings when
you turn off the power. (ON/OFF/CUSTOM)

Changes the amount of information (ISO, WHITE BALANCE,
etc.) displayed on the Monitor/Viewfinder.

Turns the beep sound (used for warnings, etc.) ON/OFF.

Selects whether to display images on the
Monitor/Viewfinder while saving them to a card.

Chooses the length of time before the camera enters
SLEEP mode. (30 sec/1 min/3 min/5 min/10 min)

Creates file/folder names for images to be saved.
(RESET/AUTO)

Adjusts the brightness of the Monitor/Viewfinder.

Sets the date/time.

Sets the measurement units (m/ft) during manual focus.

Sets the battery saving mode. (ON/OFF)

Selects items for the Shortcut menu on the Top menu screen.

Lets you assign a function to the Custom button on the
camera (factory default setting: AE lock).

Adjusts the ISO sensitivity. (AUTO/100/200/400/800)

Selects the exposure mode from A(Aperture priority auto),
S (Shutter priority auto) or M (Manual mode), when the
Mode dial is set to “A/S/M”.

Adjusts the flash intensity.

Adjusts the flash for slow shutter speeds. (

SLOW1/

SLOW/

SLOW2)

Sets the exposure range (

0.3/0.6/1.0) and number

of pictures (x3/x5) for Auto Bracketting.

Decides the best exposure by metering up to 8 different
spots in the picture.

Zooming can be set up to 27x (equivalent to 38mm-
1000mm on a 35mm camera).

Keeps the image in focus at all times without having to
press the shutter button halfway.

Allows approx. 4 seconds of sound recording to be
attached to a picture.

Allows sound to be recorded while shooting movies.

Allows panorama pictures to be taken (CAMEDIA
Master is required).

Changes the picture color to BLACK&WHITE, SEPIA or
WHITE/BLACK BOARD.

 

Adds sound to recorded still pictures.

 

Formats cards (FORMAT), or erases all images on
them (ALL ERASE).

 

Selects whether to keep the current camera settings
when you turn off the power. (ON/OFF)

Turns the beep sound (used for warnings, etc.) ON/OFF.

Adjusts the brightness of the Monitor/Viewfinder.

Sets the date/time.

Selects the number of frames in the Index display.
(4/9/16-frame)

 

Shooting

: Zooms in/out.

Playback

: Displays multi-

ple pictures at
the same time
(Index-display),
or enlarges pic-
tures (close-up
playback).

Print reserve: Sets trimming 

size.

Shooting: Sets sequential shooting mode

or self-timer. 

Playback:Each press erases one frame.

Shooting

: Sets aperture/shutter 

speed/exposure com-
pensation/manual
focusing values.

Playback

: Selects pictures to be

displayed.

Menu screen:Selects menu items.

●Displays menu screen.

●Sets selected items on the

menu screen.

●Puts the camera into manual

focus mode after being held
down for more than 1 second.

Displays images
for shooting or
playback.

Shooting : Turns on/off the Viewfinder/

Monitor.

Two quick presses plays back
the picture you just took.

Playback : Selects whether to display

images on either the Viewfinder
or the Monitor.

Turns on/off the power.

B

UTTON

S

&

D

ial

Shooting: Selects flash modes

(Working range[Wide: 0.1-
5.5 m (0.3-18.0 ft)/Tele: 1.2-
4.4 m (3.9-14.4 ft)

Playback: Protects pictures from being

accidentally erased.

Shooting:AE lock (factory default set-

ting)—Locks exposure.
Custom button— Performs
whichever function you have
set for it.

Playback:Rotates pictures.

M

ENU

 

Changes the amount of information (ISO, WHITE BALANCE, etc.) 
displayed on the Monitor/Viewfinder.

Macro

: Takes close-up pictures (Working range 

[Wide:0.1-0.6 m (0.3-2.0 ft)/Tele: 1.2- 

2.0 m (3.9-6.5 ft)).  

Spot

: Selects area for metering.

Playback : Selects pictures for printing (Print reserve).