Olympus E-5 User Guide

Page of 172
47
EN
2
Exposure
H Center weighted averaging metering
This metering mode provides the average metering between the 
subject and the background lighting, placing more weight on the 
subject at the center. Use this mode when you do not want the light 
level of the background to affect the exposure value.
I Spot metering
The camera meters a very small area around the center of the subject, 
defined by the spot metering area mark in the viewfinder. Use this 
mode when there is very strong backlight.
IJ Spot metering - highlight control
When the overall background is bright, white areas of the image will 
come out gray if you use the camera’s automatic exposure. Using this 
mode enables the camera to shift to over-exposure, allowing accurate 
white reproduction.
Metering area is the same as spot metering.
IK Spot metering - shadow control
When the overall background is dark, black areas of the image will come out gray if you use the 
camera’s automatic exposure. Using this mode enables the camera to shift to under-exposure, 
allowing accurate black reproduction. Metering area is the same as spot metering.
In some situations, you may get better results if you manually compensate (adjust) the 
exposure value set automatically by the camera. In many cases, bright subjects (such as 
snow) will turn out darker than their natural colors. Adjusting toward + makes these subjects 
closer to their real shades. For the same reason, adjust toward – when shooting dark 
subjects. The exposure can be adjusted in a range of ±5.0 EV.
Exposure compensation
Direct button
F + j/k
: Metering area
-2.0EV
±0
+2.0EV
Adjust toward –
Adjust 
toward +
F button
s0033_e_00_0_unified.book  47 ページ  2010年8月19日 木曜日 午後6時18分