Olympus 1040 User Guide
24 EN
Adjusting to a natural color scheme
[WB]
[WB]
K CAMERA MENU X WB
K: P
h
s A
Submenu 2
Application
AUTO
The camera automatically adjusts
the white balance according to the
shooting scene.
the white balance according to the
shooting scene.
5
For shooting outdoors under a
clear sky
clear sky
3
For shooting outdoors under a
cloudy sky
cloudy sky
1
For shooting under tungsten
lighting
lighting
w
For shooting under daylight
fl uorescent lighting (household
lighting, etc.)
fl uorescent lighting (household
lighting, etc.)
x
For shooting under neutral
fl uorescent lighting (desk lamps,
etc.)
fl uorescent lighting (desk lamps,
etc.)
y
For shooting under white
fl uorescent lighting (offi ces, etc.)
fl uorescent lighting (offi ces, etc.)
Selecting the ISO sensitivity [ISO]
K CAMERA MENU X ISO
K: P
In the ISO setting, although smaller values
result in less sensitivity, sharp images
can be taken under fully lit conditions.
Larger values result in higher sensitivity,
and images can be taken at fast shutter
speeds even under dimly lit conditions. High
sensitivity introduces electrical noise into the
resulting picture, which may give it a grainy
appearance.
can be taken under fully lit conditions.
Larger values result in higher sensitivity,
and images can be taken at fast shutter
speeds even under dimly lit conditions. High
sensitivity introduces electrical noise into the
resulting picture, which may give it a grainy
appearance.
Submenu 2
Application
AUTO
The camera automatically adjusts
the sensitivity according to the
shooting scene.
the sensitivity according to the
shooting scene.
50/100/200/400/
800/1600/3200
800/1600/3200
*1
The ISO sensitivity is fi xed.
*1
When set to [3200], [IMAGE SIZE] is limited to [I]
or lower.
Shooting pictures sequentially while
the shutter button is held down [DRIVE]
the shutter button is held down [DRIVE]
K CAMERA MENU X DRIVE
K: P
h
Submenu 2
Application
o
One frame is shot each time the
shutter button is pressed.
shutter button is pressed.
O
*1
Sequential shooting at a focus,
brightness (exposure) and white
balance that is locked in the fi rst
frame.
brightness (exposure) and white
balance that is locked in the fi rst
frame.
*1
The shooting speed varies depending on the
settings for [
settings for [
D IMAGE QUALITY] (p. 23).
When set to [O], fl ash is fi xed at [
$]
(FLASH OFF) and [ISO] is set to [AUTO].
When set to [O], [IMAGE SIZE] is limited
to [I] or lower. Moreover, [FINE ZOOM]
(p. 24), [DIGITAL ZOOM] (p. 25), and
[R (Still picture REC)] (p. 25) are not
available.
(p. 24), [DIGITAL ZOOM] (p. 25), and
[R (Still picture REC)] (p. 25) are not
available.
Shooting at higher magnifi cations than
optical zoom without reducing the
image quality [FINE ZOOM]
optical zoom without reducing the
image quality [FINE ZOOM]
K CAMERA MENU X FINE ZOOM
K: P
h
s
Submenu 2
Application
OFF
Only optical zoom is used to zoom
in for shooting.
in for shooting.
ON
Optical zoom and image cropping
are combined to zoom in for
shooting (up to 17×).
are combined to zoom in for
shooting (up to 17×).
This function will not reduce the image
quality since it dose not convert the data
with fewer pixels into the data with larger
pixels.
with fewer pixels into the data with larger
pixels.
When set to [ON], [IMAGE SIZE] is limited
to [H] or lower.
When [DIGITAL ZOOM] is set to [ON], this
setting is not available.
This function is not available when
[
% SUPER MACRO] (p. 19) is selected.
d4377_e_oima_000_book_cs2e.indb 24
d4377_e_oima_000_book_cs2e.indb 24
7/1/2008 12:09:02 PM
7/1/2008 12:09:02 PM