Olympus 1040 User Guide
45
EN
Error message
When one of the messages below is
displayed on the monitor, check the
corrective action.
corrective action.
Error message
Corrective action
q
CARD ERROR
Card problem
Insert a new card.
Insert a new card.
q
WRITE
PROTECT
Card problem
Use a computer to cancel the
read-only setting.
Use a computer to cancel the
read-only setting.
>
MEMORY FULL
Internal memory problem
Insert a card.
Erase unwanted images.
Erase unwanted images.
*1
•
•
•
q
CARD FULL
Card problem
Replace the card.
Erase unwanted images.
Erase unwanted images.
*1
•
•
•
OK
SET
CARD SETUP
CLEAN CARD
FORMAT
Card problem
Use
CE
to select [CLEAN
CARD], and press the x
button. Take out the card, wipe
the contact area (p. 49) with a
soft, dry cloth, and then load
the card again.
Use
button. Take out the card, wipe
the contact area (p. 49) with a
soft, dry cloth, and then load
the card again.
Use
CE
to select [FORMAT],
and press the x button. Next,
use
use
CE
to select [YES], and
press the x button.
*2
•
•
IN
OK
SET
MEMORY SETUP
POWER OFF
MEMORY FORMAT
Internal memory problem
Use
Use
CE
to select [MEMORY
FORMAT], and press the x
button. Next, use
button. Next, use
CE
to select
[YES], and press the x button.
*2
L
NO PICTURE
Internal memory/Card problem
Take pictures before viewing
them.
Take pictures before viewing
them.
r
PICTURE
ERROR
Problem with selected image
Use photo retouch software,
etc. to view the image on a
computer. If the image still
cannot be viewed, the image fi le
is corrupted.
Use photo retouch software,
etc. to view the image on a
computer. If the image still
cannot be viewed, the image fi le
is corrupted.
r
THE IMAGE
CANNOT
BE EDITED
Problem with selected image
Use photo retouch software, etc.
to edit the image on a computer.
Use photo retouch software, etc.
to edit the image on a computer.
CARD-COVER
OPEN
Operation problem
Close the battery/card
compartment cover.
Close the battery/card
compartment cover.
THE LENS
BARRIER IS
CLOSED.
Operation problem
Slide the lens barrier down when
shooting.
Slide the lens barrier down when
shooting.
g
BATTERY
EMPTY
Battery problem
Charge the battery.
Charge the battery.
NO
CONNECTION
Connection problem
Connect the camera and
computer or printer correctly.
Connect the camera and
computer or printer correctly.
NO PAPER
Printer problem
Load paper into the printer.
Load paper into the printer.
NO INK
Printer problem
Refi ll the ink in the printer.
Refi ll the ink in the printer.
JAMMED
Printer problem
Remove the jammed paper.
Remove the jammed paper.
SETTINGS
CHANGED
*3
Printer problem
Return to the status where the
printer can be used.
Return to the status where the
printer can be used.
PRINT ERROR
Printer problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
power on again.
Turn off the camera and printer,
check the printer for any
problems, and then turn the
power on again.
r
CANNOT PRINT
*4
Problem with selected image
Use a computer to print.
Use a computer to print.
*1
Before erasing important images, download them to
a computer.
*2
All data will be erased.
*3
This is displayed, for instance, when the printer’s
paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.
the printer while making the print settings on the
camera.
*4
This camera may be unable to print images taken by
other cameras.
d4377_e_oima_000_book_cs2e.indb 45
d4377_e_oima_000_book_cs2e.indb 45
7/1/2008 12:09:09 PM
7/1/2008 12:09:09 PM