Pioneer VSX-32 User Manual
Connecting your equipment
03
30
En
Connecting AM/FM antennas
Connect the AM loop antenna and the FM wire antenna
as shown below. To improve reception and sound quality,
connect external antennas (see Connecting external
antennas below).
as shown below. To improve reception and sound quality,
connect external antennas (see Connecting external
antennas below).
1
Pull off the protective shields of both AM antenna
wires.
2
Push open the tabs, then insert one wire fully into
each terminal, then release the tabs to secure the AM
antenna wires.
antenna wires.
3
Fix the AM loop antenna to the attached stand.
To fix the stand to the antenna, bend in the direction
indicated by the arrow (fig. a) then clip the loop onto the
stand (fig. b).
indicated by the arrow (fig. a) then clip the loop onto the
stand (fig. b).
• If you plan to mount the AM antenna to a wall or other
surface, secure the stand with screws (fig. c) before
clipping the loop to the stand. Make sure the
reception is clear.
clipping the loop to the stand. Make sure the
reception is clear.
4
Place the AM antenna on a flat surface and in a
direction giving the best reception.
5
Connect the FM wire antenna into the FM antenna
socket.
For best results, extend the FM antenna fully and fix to a
wall or door frame. Don’t drape loosely or leave coiled up.
For best results, extend the FM antenna fully and fix to a
wall or door frame. Don’t drape loosely or leave coiled up.
Connecting external antennas
To improve FM reception, connect an external FM
antenna to FM UNBAL 75
antenna to FM UNBAL 75
Ω.
To improve AM reception, connect a 5 m to 6 m (16 ft. to
20 ft.) length of vinyl-coated wire to the AM LOOP
terminals without disconnecting the supplied AM loop
antenna.
20 ft.) length of vinyl-coated wire to the AM LOOP
terminals without disconnecting the supplied AM loop
antenna.
For the best possible reception, suspend horizontally
outdoors.
outdoors.
MULTI-ZONE setup
This receiver can power up to three (VSX-33)/two (VSX-32)
independent systems in separate rooms after you have
made the proper MULTI-ZONE connections.
Different sources can be playing in three (VSX-33)/two
(VSX-32) zones at the same time or, depending on your
needs, the same source can also be used. The main and
sub zones have independent power (the main zone power
can be off while one (or both) of the sub zones is on) and
the sub zones can be controlled by the remote or front
panel controls.
independent systems in separate rooms after you have
made the proper MULTI-ZONE connections.
Different sources can be playing in three (VSX-33)/two
(VSX-32) zones at the same time or, depending on your
needs, the same source can also be used. The main and
sub zones have independent power (the main zone power
can be off while one (or both) of the sub zones is on) and
the sub zones can be controlled by the remote or front
panel controls.
Important
• The explanations for ZONE 3 below only apply to the
VSX-33.
ANTENNA
FM UNBAL 75
AM LOOP
3
4
5
fig. a
fig. b
fig. c
1
2
ANTENNA
FM UNBAL 75
AM LOOP
75
Ω coaxial cable
ANTENNA
FM UNBAL 75
AM LOOP
Outdoor antenna
Indoor antenna
(vinyl-coated wire)
5 m to 6 m
(16 ft. to 20 ft.)
VSX-33_UXJCB.book 30 ページ ２０１０年３月９日 火曜日 午前１０時３９分