Pioneer VSX-32 User Manual

En

Synchronized operations below with a Control with 
HDMI-compatible Pioneer TV or Blu-ray disc player or 
with a component of another make that supports the 
Control with HDMI functions are possible when the 
component is connected to the receiver using an HDMI 
cable.

• The receiver’s volume can be set and the sound can 

be muted using the TV’s remote control.

• The

 

receiver’s input switches over automatically 

when the TV’s channel is changed or a Control with 
HDMI-compatible component is played.

• The receiver’s power is also set to standby, when the 

TV’s power is set to standby.

• With  Pioneer devices, the Control with HDMI 

functions are referred to as “KURO LINK”.

• You cannot use this function with components that 

do not support Control with HDMI.

• We  do  not  guarantee this receiver will work with 

Pioneer Control with HDMI-compatible components 
or components of other makes that support the 
Control with HDMI function. We do not guarantee 
that all synchronized operations will work with 
components of other makes that support the Control 
with HDMI function.

• Use  a  High  Speed HDMI

 cable when you want to 

use the Control with HDMI function. The Control 
with HDMI function may not work properly if a 
different type of HDMI cable is used.

• For details about concrete operations, settings, etc., 

refer to also the operating instructions for each 
component.

You can use synchronized operation for a connected TV 
and up to five other components.

• Be  sure to connect the TV’s audio cable to the audio 

input of this unit. When the TV and receiver are 
connected by HDMI connections, if the TV supports 
the HDMI Audio Return Channel function, the sound 
of the TV is input to the receiver via the HDMI 
terminal, so there is no need to connect an audio 
cable. In this case, set TV Audio at HDMI Setup to 
via HDMI (see HDMI Setup below).

For details, see Connecting your TV and playback 
components on page 24.

• When connecting this system or changing 

connections, be sure to switch the power off and 
disconnect the power cord from the wall socket.
After completing all connections, connect the power 
cords to the wall socket.

• After this receiver is connected to an AC outlet, a 2 

second to 10 second HDMI initialization process 
begins. You cannot carry out any operations during 
initialization. The HDMI indicator on the display unit 
blinks during initialization, and you can turn this 
receiver on once it has stopped blinking.

• To get the most out of this function, we recommend 

that you connect your HDMI component not to a TV but 
rather directly to the HDMI terminal on this receiver.

• While  the  receiver is equipped with six HDMI inputs 

(BD, HDMI 1 to 5), the Control with HDMI function 
can only be used with up to three DVD or Blu-ray disc 
players or up to three DVD or Blu-ray disc recorders.

• VSX-33 only: The Control with HDMI function can be 

used with a TV connected to the HDMI OUT 1 
terminal, but not with a TV connected to the HDMI 
OUT 2 terminal.

You must adjust the settings of this receiver as well as the 
connected Control with HDMI-compatible components 
in order to make use of the Control with HDMI function. 
For more information see the operating instructions for 
each component.

Choose whether to set this unit’s Control with HDMI 
function ON or OFF. You will need to set it to ON to use 
the Control with HDMI function.

When using a component that does not support the 
Control with HDMI function, set this to OFF.

• ON – Enables the Control with HDMI function. When 

this unit’s power is turned off and you have a 
supported source begin playback while using the 
Control with HDMI function, the audio and video 
outputs from the HDMI connection are output from 
the TV.

VSX-33_UXJCB.book  56 ページ  ２０１０年３月９日　火曜日　午前１０時３９分