Pioneer AVH-P4100DVD Installation Instruction

Connecting the units

Connecting and installing the optical cable connection box

WARNING

• Avoid installing the optical cable connection

box in locations where the operation of safety

devices such as airbags is prevented by this

unit. Otherwise, there is a danger of a fatal

accident.

• Avoid installing the optical cable connection

box in locations where the operation of the

brake may be prevented. Otherwise, it may

result in a traffic accident.

• Fix the optical cable connection box securely

with the hook and loop fastener or lock tie. If

the unit is loose, it disturbs driving stability,

which may result in a traffic accident.

CAUTION

• Install this unit using only the parts supplied with

this unit. If other parts are used, this unit may be

damaged or could dismount itself, which leads to

an accident or other problems.

• Do not install this unit near the doors where

rainwater is likely to be spilled on the unit.

Incursion of water into the unit may cause smoke

or fire.

Connecting the optical cable

1. Connect the optical cable and ground

lead to the main unit.

Connect the optical cable so that it does not

protrude from the main unit, as shown in the

illustration. Fasten the ground lead to the

protrusion on the back of the main unit.

2. Connect the optical cable to the

optical cable connection box.

Installing the optical cable
connection box

• When installing the optical cable

connection box with the hook and

loop fastener.

Install the optical cable connection box

using the hook and loop fastener in the

ample space of the console box.

• When installing the optical cable

connection box with the lock tie.

Wrap the optical cable and connection box

with the protection tape and fasten with the

power code using the lock tie.

Screw

Optical cable

Hook fastener

Loop fastener

Wrap with the protection tape

Fasten with the lock tie