Pioneer VSX-920-K User Guide

Page of 160
Connecting your equipment
03
22
En
HDMI, the HDMI logo and High-Definition 
Multimedia Interface are trademarks or 
registered trademarks of HDMI Licensing, LLC.
“x.v.Color” and x.v.Color logo are trademarks of 
Sony Corporation.
Analog audio cables
Use stereo RCA phono cables to connect 
analog audio components. These cables are 
typically red and white, and you should 
connect the red plugs to R (right) terminals 
and white plugs to L (left) terminals.
Digital audio cables
Commercially available coaxial digital audio 
cables or optical cables should be used to 
connect digital components to this receiver.
1
Video cables
Standard RCA video cables
These cables are the most common type of 
video connection and are used to connect to 
the composite video terminals. The yellow 
plugs distinguish them from cables for audio.
Component video cables
Use component video cables to get the best 
possible color reproduction of your video 
source. The color signal of the TV is divided into 
the luminance (
Y) signal and the color (P
B
 and 
P
R
) signals and then output. In this way, 
interference between the signals is avoided. 
Note
1 • When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical socket.
• When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners.
• You can also use a standard RCA video cable for coaxial digital connections.
Right (red)
Analog audio cables
Left (white)
Coaxial digital audio cable
Optical cable
Standard RCA video cable
Green (Y)
Blue (P
B
)
Red (P
R
)
Component video cables
VSX-920_UCSMXCN_En.book  22 ページ  2010年1月21日 木曜日 午前9時43分