Pioneer VSX-920-K User Guide

En

This diagram shows connections of a TV (with no HDMI input) and DVD player (or other playback 
component) to the receiver.

123

• With these connections, the picture is not output to the TV even if the DVD player is connected 

with an HDMI cable. Connect the DVD player’s video signals using a composite or component 
cord.

• Connect using an HDMI cable to listen to HD audio on the receiver. Do not use an HDMI cable 

to input video signals.
Depending on the video component, it may not be possible to output signals connected by 
HDMI and other methods simultaneously, and it may be necessary to make output settings. 

Please refer to the operating instructions 

supplied with your component

 for more information.

1 If the connection was made using an optical cable, you’ll need to tell the receiver which digital input you connected the TV to 

(see Choosing the input signal on page 43).

2 If the connection was made using an optical or a coaxial cable, you’ll need to tell the receiver which digital input you connected 

the DVD player to (see Choosing the input signal on page 43).

3 If both TV and player has a component video jacks, you can connect these too. See Using the component video jacks on page 28 

for more on this.

TV

DVD player

This connection is 
required in order to listen 
to the sound of the TV 
over the receiver.

 

1

 

2

 

3

VSX-920_UCSMXCN_En.book  26 ページ  ２０１０年１月２１日　木曜日　午前９時４３分