Pioneer VSX-920-K User Guide

En

then press the SETUP button.
An on-screen display (OSD) appears on your 
TV. Use 

/// and ENTER on the remote 

control to navigate through the screens and 
select menu items. Press 

RETURN to exit the 

current menu.

• Press 

SETUP at any time to exit the System 

Setup menu.

1

Try to be as quiet as possible after pressing 
ENTER. The system outputs a series of test 
tones to establish the ambient noise level. 

• Make sure the microphone is connected.

• Make sure the subwoofer is on and the 

volume is turned up.

• See below for notes regarding background 

noise and other possible interference.

A progress report is displayed on-screen while 
the receiver outputs test tones to determine the 
speakers present in your setup. Try to be as 
quiet as possible while it’s doing this. 

• For correct speaker settings, do not adjust 

the volume during the test tones. 

The configuration shown on-screen should 
reflect the actual speakers you have.

• With error messages (such as

ambient noise) select RETRY after 
checking for ambient noise (see Other 
problems when using the Auto MCACC 
Setup on page 33).

If the speaker configuration displayed isn’t 
correct, use 

/ to select the speaker and 

/ to change the setting. When you’re 
finished, go to the next step.

If you see an error message (

ERR) in the right 

side column, there may be a problem with the 
speaker connection. If selecting 

RETRY 

doesn’t fix the problem, turn off the power and 
check the speaker connections.

1 The screensaver automatically starts after three minutes of inactivity. If you cancel the Auto MCACC Setup at any time, the 

receiver automatically exits and no settings will be made.

2

MIC IN blinks when the microphone is not connected to MCACC SETUP MIC.

VSX-920_UCSMXCN_En.book  32 ページ  ２０１０年１月２１日　木曜日　午前９時４３分