Pioneer VSX-920-K User Guide

En

• Default  setting: 

This setting decides the cutoff between bass 
sounds playing back from the speakers 
selected as 

LARGE, or the subwoofer, and bass 

sounds playing back from those selected as 
SMALL. It also decides where the cutoff will be 
for bass sounds in the LFE channel.

1

 

Frequencies below the cutoff point will be sent 
to the subwoofer (or 

LARGE speakers).

You return to the Manual SP Setup menu.

Using the channel level settings, you can 
adjust the overall balance of your speaker 
system, an important factor when setting up a 
home theater system. 

 

•

Manual – Move the test tone manually 
from speaker to speaker and adjust 
individual channel levels.

•

Auto – Adjust channel levels as the test 
tone moves from speaker to speaker 
automatically.

The test tones will start after you press 

ENTER. 

After the volume increases to the reference 
level, test tones will be output.

/.
If you selected 

Manual, use 

/ to switch 

speakers. The 

Auto setup will output test 

tones in the order shown on-screen: 

Adjust the level of each speaker as the test 
tone is emitted.

2

You return to the Manual SP Setup menu.

1 For more on selecting the speaker sizes, see Speaker Setting on page 45.



2 • If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level 

of each speaker to 75 dB SPL (C-weighting/slow reading).
• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.



VSX-920_UCSMXCN_En.book  47 ページ  ２０１０年１月２１日　木曜日　午前９時４３分