Pioneer VSX-920-K User Guide

En

No picture or sound.

• If the problem still persists when connecting your HDMI component 
directly to your monitor, please consult the component or monitor 
manual or contact the manufacturer for support.

No picture.

• Depending in the output settings of the source component, it may be 
outputting a video format that can’t be displayed. Change the output 
settings of the source, or connect using the component or composite 
jacks.
• This receiver is HDCP-compatible. Check that the components you are 
connecting are also HDCP-compatible. If they are not, please connect 
them using the component or composite video jacks.
• Depending on the connected source component, it’s possible that it 
will not work with this receiver (even if it is HDCP-compatible). In this 
case, connect using the component or composite video jacks between 
source and receiver.
• If video images do not appear on your TV or flat panel TV, try adjusting 
the resolution, Deep Color or other setting for your component.
• To output signals in Deep Color, use an HDMI cable (High Speed 
HDMI

TM

 Cable) to connect this receiver to a component or TV with the 

Deep Color feature.

No sound, or sound 
suddenly ceases.

• If you’ve made separate connections for audio, make sure you have 
assigned the analog/digital jack(s) to the corresponding HDMI input for 
the component. 
• Check the audio output settings of the source component.
• Check that the Audio Parameter setting is set to 

(refer to page 41).
• If the component is a DVI device, use a separate connection for the 
audio.
• HDMI format digital audio transmissions require a longer time to be 
recognized. Due to this, interruption in the audio may occur when 
switching between audio formats or beginning playback.
• Turning on/off the device connected to this unit’s HDMI OUT terminal 
during playback, or disconnecting/connecting the HDMI cable during 
playback, may cause noise or interrupted audio.

VSX-920_UCSMXCN_En.book  75 ページ  ２０１０年１月２１日　木曜日　午前９時４３分