Pioneer pdp-4270hd User Guide

En

The weight of a 42 inch Plasma Display is about 29 kg (64 lbs.), 
it has no depth, and is unstable. Therefore, at least two people 
must assemble and install it.

Loosen and remove the two installation bolts 

➀ using the 

enclosed hexagonal wrench.

Loosen and remove the two installation bolts 

➁ using the 

enclosed hexagonal wrench.

Remove the Plasma Display from the stand.

• Make sure to keep the installation bolts 

➀ and ➁ that 

have been removed as they are re-used when attaching 
the stand to the Plasma Display.

• Be sure to install it on a flat, stable location.

Fit the stand’s support columns to the bottom of the 
Plasma Display as indicated by arrows, then slowly insert 
them vertically.

• Be extremely careful not to insert the support columns 

of the stand into any part of the Plasma Display other 
than the stand insertion slots. Doing so might damage 
the Plasma Display panel or its ports or result in the 
warping of the stand.

Attach the Plasma Display at the points indicated by the 
arrows and tighten the installation bolts 

➁ firmly using the 

enclosed hexagonal wrench.

Tighten the installation bolts 

➀ firmly using the enclosed 

hexagonal wrench.

• Be sure to install it on a flat, stable location.

• Insert the screws in the holes vertically and do not tighten 

them with more force than necessary.

Installation bolts 

➀

(M8 x 30 mm: silver) 

Installation bolts 

➁

(M8 x 60 mm: silver) 

Line up the column supports with 
the bottom of the Plasma Display as 
indicated in the accompanying diagram.

Installation bolts 

➁

(M8 x 60 mm: silver) 

Installation bolts 

➀

(M8 x 30 mm: silver) 

PDP6070HD.book  Page 28  Friday, May 19, 2006  5:01 PM