Pioneer pdp-4270hd User Guide

En

When the selected time elapses, the Sleep Timer automatically 
places the system into the standby mode.

Press 

SLEEP to select the desired time. 

• The timer starts counting.

• Each time you press 

SLEEP, the selection is switched as 

below:

• The factory default is “Off”.

• To cancel the Sleep Timer, select “Off” by pressing 

SLEEP.

• Five minutes before the selected time elapses, the remaining 

time appears every minute.

You can also use the menu to set the Sleep Timer.

Press 

HOME MENU.

Select “Sleep Timer”. ( /  then 

ENTER)

Select the desired time. ( /  then 

ENTER)

Press 

HOME MENU to exit the menu.

Select from the five viewing options, depending on the current 
environment (e.g., room brightness), the type of the current TV 
program, or the type of images input from external equipment.

Press 

AV SELECTION.

• The current AV Selection mode appears.

Press 

AV SELECTION again before the displayed mode 

disappears.

• For AV source, the mode is switched in this order; 

STANDARD, DYNAMIC, MOVIE, GAME, then USER.

• For PC source, the mode is switched between 

STANDARD and USER. 

You can also use the menu to change the options.

Press 

HOME MENU.

Select “Picture”. ( /  then 

ENTER)

Select “AV Selection”. ( /  then 

ENTER)

Select the desired option. ( /  then 

ENTER)

Press 

HOME MENU to exit the menu.

• You can also press 

AV SELECTION on the remote control 

unit to switch the viewing option.

• If you have selected “DYNAMIC”, you cannot select 

“Contrast”, “Brightness”, “Color”, “Tint”, “Sharpness”, “Pro 
Adjust” and “Reset”; these menu items are dimmed.

• To prevent the screen from damage, you can freely change 

the AV selection mode while enjoying the Home Gallery 
function. However, when you resume the Home Gallery after 
having quit it, “STANDARD” is automatically selected for the 
AV source.

• While enjoying the Home Gallery, you can freely change the 

AV selection mode, but you cannot select “USER”.

For a highly defined image in a normally bright 
room
This selection is shared by the external input and 
TV input sources.

For a very sharp image with maximum contrast
This mode does not allow manual image quality 
adjustment.
This selection is shared by the external input and 
TV input sources.

For movies
This selection is shared by the external input and 
TV input sources.

Lowers image brightness for easier viewing.
This selection is shared by the external input and 
TV input sources.

Allows you to customize settings as desired. You 
can set the mode for each input source.

For a highly defined image in a normally bright room

Allows you to customize settings as desired. You can 
set the mode for each input source.

PDP6070HD.book  Page 63  Friday, May 19, 2006  5:01 PM