Pioneer pdp-4270hd User Guide

En

Adjusts the horizontal and vertical positions of images on the 
Plasma Display.

Press 

HOME MENU.

Select “Option”. ( /  then 

ENTER)

Select “Position”. ( /  then 

ENTER)

Select “H/V Position Adjust”. ( /  then 

ENTER)

Adjust the vertical position ( / ) or horizontal position 
( / ).

Press 

HOME MENU to exit the menu.

• To restore the factory defaults for all the items, press  /  to 

select “Reset” in step 4, and then press 

ENTER. A 

confirmation screen appears. Press  /  to select “Yes”, and 
then press 

ENTER.

• Adjustments are stored separately for each input source.

Use Auto Setup to automatically adjust positions and clock of 
images coming from a personal computer.

Press 

HOME MENU.

Select “Option”. ( /  then 

ENTER)

Select “Auto Setup”. ( /  then 

ENTER)

• Auto Setup starts.

Press 

HOME MENU to exit the menu.

• When Auto Setup is finished, “Auto Setup completed.” 

appears.

• Even when “Auto Setup completed.” appears, Auto Setup 

may have failed, depending on conditions.

• Auto Setup may fail with a PC image composed of similar 

patterns or monochrome. If not successful, change the PC 
image and try again.

• Be sure to connect the computer to the Plasma Display and 

switch it on before starting Auto Setup.

Usually you can easily adjust the positions and clock of images 
using Auto Setup. Use Manual Setup to optimize the positions 
and clock of images when necessary.

Press 

HOME MENU.

Select “Option”. ( /  then 

ENTER)

Select “Manual Setup”. ( /  then 

ENTER)

Select an item to be adjusted. ( /  then 

ENTER)

Perform adjustment. ( /  or  / )

• With “Clock” or “Phase” selected, you can change the 

parameter using  / .

Press 

HOME MENU to exit the menu.

• To restore the factory defaults for all the items, press  /  to 

select “Reset” in step 4, and then press 

ENTER. A 

confirmation screen appears. Press  /  to select “Yes”, and 
then press 

ENTER.

PDP6070HD.book  Page 68  Friday, May 19, 2006  5:01 PM