Pioneer pdp-4270hd User Guide

En

Slide the 

Mode switch to match the device to which you 

want to preset the remote control signal.

Press 

EDIT and 1 at the same time.

• The LED flashes.

Press 

0 – 9 to enter the manufacturer code. See page 82.

• Preset mode is finished once the LED no longer lights 

up.

In the event that the device code for a particular target unit is 
unknown, you can cycle the remote through the available 
codes for that device mode and sample functions from each 
code in order to find the code that properly operates the 
desired target device. 

Slide the 

Mode switch to match the device to which you 

want to preset the remote control signal.

Press 

EDIT and 3 at the same time.

• The LED indicator flashes and the remote control unit 

enters the Library Search programming mode.

Press either 

SOURCE POWER, PLAY, 1 or CH+ to sample 

the selected code.

When the code could not be found, press 

 to advance 

to the next code or return to the previous code and repeat 
step 

3.

Press 

ENTER when the code that properly operates the 

desired target device is found.

• All the available buttons for the selected mode are 

programmed in. The remote control unit returns to 
normal operation after turning the LED indicator on for 
one second for confirmation.

You can reset all the learned and preset codes to default 
regardless of the mode.

Press 

EDIT and POWER in any Mode switch position at 

the same time.

• The LED indicator flashes and the remote control unit 

enters the Manufacturing Reset mode.

Press 

D.

• A manufacturing reset is completed. The LED indicator 

flashes for one second and the remote control unit 
returns to normal operation.

• To exit the Edit mode before it is complete, press 

EDIT again.

• If  the 

Mode switch selection is changed when in the Edit 

mode, the Edit mode is canceled.

• If no operation is performed for more than one minute, the 

Edit mode is canceled.

• When you enter a code not listed, the LED flashes quickly.

• The initial mode is “PIONEER”.

PDP6070HD.book  Page 81  Friday, May 19, 2006  5:01 PM